0821223006 Anwochi cylinder imported from Germany

0821223006 Anwochi cylinder imported from Germany

How to select AVEENTICS standard cylinders?

(1) From the perspective of action, it can be divided into single acting and double acting. The schematic diagram of the structure is shown in the figure. The former is further divided into two types: spring pressing back and pressing out. It is generally used for short stroke and does not require output force or motion speed

In high occasions (low price, low energy consumption), double acting cylinders are more widely used. (Note: Do not equate a single or double acting cylinder with or without a magnetic ring cylinder)

(2) From a functional perspective (more in line with the design situation), there are many types, such as standard cylinders, composite cylinders, special cylinders, swing cylinders, air melons, etc. Among them, the most commonly used ones are free cylinders

Installation type cylinder, thin type cylinder, pen shaped cylinder, double rod cylinder, slide table cylinder, rodless cylinder, rotary cylinder, gripper cylinder, etc,

Confirm the cylinder diameter and stroke; The stroke is the error distance between the extension and retraction of the piston rod. Some people may calculate the stroke by exposing the cylinder itself, which is incorrect. The cylinder diameter is the cylinder barrel

The diameter of the inner wall, usually the outer diameter, can also be used to estimate the size of the inner diameter. Under the same air pressure, the larger the cylinder diameter, the greater the output. The commonly used standard cylinders in China have the same function, with the main difference being the external

Installation size and model; This is a basic outline drawing of a standard cylinder. Please confirm the installation distance of cylinder KB and the total length distance of cylinder A+stroke. If the accessories installed are not compatible, please confirm the required dimensions

It's also different.

The dimensions that need to be confirmed for the installation of the flange plate and the front flange installation need to be confirmed: the distance from the flange to the red line of the piston rod and the installation hole distance of the flange plate BD and BF. If it's a post installation, the same applies

The distance from the flange to the top of the cylinder, at which point the installation hole distance of the cylinder itself is not important. Install CACB accessories to ensure the diameter of the DE hole and the distance from the center point to the top of the cylinder piston, in years

The distance between the installation holes of the cylinder itself is not important. To install with LE footrest, it is necessary to confirm the distance between the AC+travel installation holes. Facilitate the installation of the bracket, confirm the middle distance and extension of the bracket from the bottom to the piston rod

Length. The distance between the TC intermediate shaft and the top of the cylinder when installing the accessory bracket in TC and TCM. There are many types of accessories for standard cylinders, and different accessories can be used for cylinder installation in various working environments

Using it can achieve unexpected results.

1. Selection of installation form

The installation form is determined by factors such as installation location and usage purpose. In general, fixed installation methods are commonly used: axial support (Ms1 type), front flange (MF1 type), rear flange (MF2 type), etc;

When the piston is required to move back and forth in a straight line while the cylinder body needs to swing in a large arc, installation methods such as tail ear shaft (MP4 or MP2 type) and intermediate shaft pin (MT4 type) can be selected; If you need to input during rotation

Linear reciprocating motion can be achieved using a rotary cylinder. When there are special requirements, special cylinders can be used.

2. The magnitude of the output force

Based on the required force of the working mechanism, consider the cylinder load rate to determine the thrust and tension on the piston rod, and thus determine the cylinder inner diameter.

Due to its low working pressure (0.4~0.6MPa), the output of the cylinder is not very large, usually around 10000N7 (not exceeding 20000N). If the output force is too large, its volume (diameter) will be too large

Expansion mechanisms should be used as much as possible on pneumatic equipment to reduce the size of the cylinder.

3. Cylinder stroke

The stroke of the cylinder (piston) is related to its usage and the stroke ratio of the working mechanism. In most cases, full stroke should not be used to avoid collision between the piston and cylinder head, especially for clamping and other mechanisms,

To ensure the clamping effect, an additional stroke allowance of 10-20mm must be added according to the calculated stroke.

Dongguan Guanglian is a professional company engaged in the import and trade of European industrial products, committed to building a bridge between small and medium-sized automation enterprises in Germany, Switzerland, Italy and domestic users. The company supplies a wide range of products, including industrial automation equipment, electromechanical industrial control equipment, hydraulic equipment, electrical equipment and components, water quality analysis instruments and meters, and other products.

Purchasing locally from German factories, enjoying good discounts, short lead times, and European original procurement services. For some German products, we obtain favorable discounts from manufacturers through centralized bulk procurement, which can provide lower quotes than the domestic market price and maximize profits for customers. For industrial products of German and European small brands that are not easy to find, we can help you find and procure on your behalf. We are an honest enterprise and strive for mutual benefit and win-win results!

With standardized management, streamlined procurement model, sound logistics management, and excellent after-sales service, we are dedicated to serving you! All imported products from Europe can be purchased.

Partial model display of AVEENTICS cylinders in Germany:

R402000986 GSU-DA-016-0200

R402000987 GSU-DA-016-0300

R402000988 GSU-DA-016-0400

R402000989 GSU-DA-016-0500

R402000990 GSU-DA-016-0600

R402000991 GSU-DA-016-0700

R402000992 GSU-DA-016-0800

R402000993 GSU-DA-016-0900

R402000994 GSU-DA-016-1000

R402000995 GSU-DA-025-0200

R402000996 GSU-DA-025-0300

R402000997 GSU-DA-025-0400

R402000998 GSU-DA-025-0500

R402000999 GSU-DA-025-0600

R402001000 GSU-DA-025-0700

R402001001 GSU-DA-025-0800

R402001002 GSU-DA-025-0900

R402001003 GSU-DA-025-1000

R402001017 ICM-DA-016-0016-0

R402001018 ICM-DA-020-0035-0

R402001019 ICM-DA-025-0040-M

0821223006 Anwochi cylinder imported from Germany