00316530 type solenoid valve German BURKERT

The working principle of the German Baode 00316530 proportional controller is to convert external standard signals into pulse width modulation (PWM) signals to continuously adjust the opening of the proportional valve and fluid output variables (such as flow rate).

The following are the relevant parameters of the German Baode 00316530 proportional controller:

parameterexplanation

Product ModelBurkert Proportional Valve Controller 8605 Type

output signalPWM signal

PWM frequencyAdjustable from 80Hz to 6kHz

Working Voltage12–24VDC

power consumptionAbout 1W (without valve)

Input signal range0-20mA, 4-20mA or 0-5V, 0-10V (configurable)

input impedance200 Ω (current input), 20k Ω (voltage input)

Controller protection levelIP65

Standard rail protection levelIP40

The characteristics and functions of Baode 8605 proportional valve controller (model 00316530).

The Baode 8605 proportional valve controller is a digital control electronic device mainly used to control proportional solenoid valves with a power range of 40-2000mA. It can convert external standard signals into pulse width modulation (PWM) signals to continuously adjust the opening of proportional valves and fluid output variables (such as flow rate). Some of the main features and functions of this controller include: internal current control using the duty cycle of PWM signals as control variables, ensuring that each value of the input signal is associated with a specific value of the effective coil current, regardless of the temperature state of the coil; Through the display screen and control buttons, electronic components can be easily adjusted to adapt to specific proportional valves and application conditions; An optional I/O circuit board can be used to connect external sensors or switches, and the valve's response to these input signals can be configured (such as two-point control)

Instructions for using the German Baode 00316530 proportional controller

The German Baode 00316530 proportional controller is an electronic device used to control proportional solenoid valves. It can convert external standard signals into pulse width modulation (PWM) signals to continuously adjust the opening of the proportional valve and fluid output variables. Here are some usage information about the proportional controller:

This proportional controller can be used in conjunction with the 2875 proportional solenoid valve.

It can convert analog input signals into PWM output signals, and the PWM frequency is adjustable.

Through the display screen and control buttons, electronic components can be easily adjusted to adapt to specific proportional valves and application specific conditions.

The Baode 8605 model can be equipped with an I/O circuit board, which allows for the connection of external sensors or switches. The response of valves to these input signals can be configured (such as two-point control).