0.8-80L/MIN high flow German BIO-TECH small flowmeter

GermanyBIO-TECHThe company was established in1992In the year, with its low flow rate (small flow meter,FCH-m，FCH-SE，Vbb，VZS . ..）The knowledge in the field of flow measurement has established new standards and is widely used in production process control and equipment matching.

GermanyBIO-TECHMain production: turbine flowmeter, elliptical gear flowmeter.The characteristics are high range ratio, high precision, and repeatability. Widely applicable.

GermanyBIO-TECHThe company develops and produces miniature flow meters for the chemical industry,0.8-80L/MIN high flow German BIO-TECH small flowmeterApplied to water purification and spray forming machines (high)160°C）Cooling circuit monitoring, laser machine/Equipment, lubrication metering system, laundry flow meter, and dishwasher flow meter are used to measure the flow rate of cooling water.0.8-80L/MIN high flow German BIO-TECH small flowmeterIt is also used to measure fuel consumption of cars, ships, trucks, tractors, generators, and fuel heating systems. Using our flow meter,High flow German BIO-TECH micro flowmeterCan measure very reliably0.005-1000 L / minWide range.

GermanyBIO-TECHLiquid micro flowmeterIt can measure various liquids, including low or high viscosity chemically aggressive liquids such as sulfuric acid, alkali, salt solutions, calcium chloride, nitric acid, cleaning agent solutions, liquid soap, sewage sludge, car cleaning and drying products, wax, and petrochemical products such as diesel, Fuel, kerosene, paraffin, lubricating oil, and hydraulic oil can all be measured.

GermanyBIO-TECHLiquid micro flowmeterHigh pressure is110 bar / 1595 PSIPower supply5-24VDCOutput signalNPN/PNP,precision2%Repeatability0.5%Flowmeters with different working principles have different temperatures and pressures. It should be determined based on the actual model.

1. Water Flowmeter
   Water flow meter/flow meter

2. Application: water, cooling water etc.
   Applicable media: neutral liquids such as water and cooling water

3. Technical data / Technical specification
   Technical Specifications

4. Messprinzip / Measurement principle
   Measurement principle: turbine（Turbine）

5. Abtastsystem / Sensing principle
   Detection method: Hall sensor, non-contact, Hall effect

6. Output signal / output
   Output signal: square wave,NPNOpen electrode pull-down（sinking）

7. Flow direction
   Flow direction: in the direction of the arrow

8. Flow range L/min / Flow range LPM
   Flow range:0.8 – 80 L/min(In)20 °CUnder water conditions)

9. DN Nominal Throughput Width / Size
   Nominal diameter:DN 15

10. Number of pulses / liter / pulses per liter
    Number of pulses: approximately 38 pulse/Rising (in)20 °CUnder water conditions)

11. Viscosity of the media v
    Medium viscosity:0 – 10 mPa·s

12. Measurement accuracy (v = 1 mPa·s) / Accuracy
    Measurement accuracy:±2 %(Under the same operating conditions)

13. Repeatability / Repeatability
    repetitiveness±0.8 %(Under the same operating conditions)

14. Operating pressure
    work pressure0.7 – 10 bar（20 °CWater)

15. Burst pressure
    Blasting pressure:>16 bar（20 °CWater)

16. Operating Temperature / Running Temperature
    Operating Temperature-10 – 95 ℃

17. Installation position
    Installation position: Any

18. Process Connection
    Process connection:2 × R 1'External thread（BSP）

19. Material / Rotor / O-Ring
    Material: Brass with tin plating/ PP / EPDM

20. Axle / Bearing / Axle / Bearing
    axis/Bearing: Stainless steel/Sapphire（Saphier）

21. Electrical connection / Voltage supply
    Supply voltage:5 – 24 VDC

22. Ausgangsstrom I max / Output current max.
    Output current:13 mA

23. Weight
    Weight: Approximately490 g

24. Abmessung in mm / Dimensions in mm
    Dimensions: Refer to the drawing（s. drawing / see drawing）