Dual axis small range dynamic torque sensor

Dual axis small range dynamic torque sensor

Product Description

ZN-T030seriesDynamic torque sensors are widely used in non-contact manufacturing for detecting torque, speed, and power in rotating power equipment such as engines, fans, railway locomotives, automobiles, airplanes, testing machines, hydraulic systems, etc. They can also be used to make viscometers. Due to its excellent stability, high measurement accuracy, and high cost-effectiveness, it has been praised by a large number of users.

Product features

1. High detection accuracy, good stability, and strong anti-interference ability.

2. Continuous measurement of forward and reverse torque without the need for repeated zeroing.
3. Small in size, lightweight, and easy to install. Can be installed horizontally and vertically.
4. The sensor is detached from the secondary instrument and can directly output frequency signals or analog quantities proportional to torque

Dual axis small range dynamic torque sensor

Scope of application

ZN-T030Series torque sensors are precision measuring instruments that measure various torques, speeds, and mechanical power. The application scope is very wide, mainly used for:

1. Detection of output torque and power of rotating power equipment such as electric motors, engines, and internal combustion engines;

2. Testing of torque and power of fans, water pumps, gearboxes, and torque wrenches;

3. Testing of torque and power in railway locomotives, automobiles, tractors, airplanes, ships, and mining machinery;

4. Can be used for torque and power detection in sewage treatment systems;

5. Can be used to manufacture viscometers;

6. Can be used in process industry and process industry.

Basic Principles

1Measurement of torque: using strain gauge electrical measurement technologyBy forming a strain bridge on the elastic axis and providing power to the bridge, the electrical signal of the elastic axis being twisted can be measured. After amplifying the strain signal, it is converted into a frequency signal proportional to the torsional strain through compression/frequency conversion.

2. Measurement of rotational speed: The measurement of rotational speed is carried out using the magneto electric code disk method, and each magneto electric code disk has30-60 teeth, the shaft drives the magnetic code disk to generate a magnetic code for each rotation30 of themPulse, when placing an order, the user needs to indicate whether the speed signal is being monitored!

Definition of Electrical Wiring

The torque sensor uses an aviation connector (with shielded cable), and the shielded cable lead is defined as follows:

red+15VDC/+24VDC

Black:GND

blue-15VDC

Yellow: Torque+（T+）

Green: Torque-(T -), Speed - (S -), Angle - (AB -)

White: RPM+(S+), angle A (A)

Brown: AngleB（B）