Taylor Hopson roughness tester Surtronic 1216 | Taylor

Taylor Hopson roughness tester Surtronic 1216 | Taylor

Taylor roughness tester Surtronic S116 measurement parameters

SURTRONIC S116 roughness tester

1、 Standard configuration for S116:

Display unit; 112-1502 standard measuring needle; Measuring needle connecting wire; Multi engraved line template; Needle lifting mechanism; USB interface charger; User manual; USB communication cable; Instrument box

2、 Technical parameters

The data shows that:

Each page of the display screen shows 7 test results, and the screen can display contour images (sectional images)

Can print test results and graphics

Talyprofile software can be used to connect to a computer and analyze test results

Data storage:

The instrument can store 100 test data and one graph

The instrument supports USB drives up to 4GB in size and can store up to 39000 graphics. Each batch can store 100000 test results, totaling 70 batches of data.

Using Talyprofile software to connect with a computer can store unlimited data.

power supply

Charger: USB interface 5v 1A 110-240VAC 50/60Hz

Charging time: 4 hours

Battery life: can be tested 2000 times on one charge

Standby time: 5000 hours

From standby mode to power on test mode, the duration should not exceed 1 second

Automatic shutdown: 30 seconds to 6 hours can be set by oneself

3、 Technical indicators:

Measurement range: 200 um, 100 um, 10 um

Resolution: 100 nm, 20 nm, 10 nm

Bottom noise (Ra): 250 nm, 150 nm, 100 nm

Repetitive accuracy (Ra): 1% test value+background noise

Sensor original: inductance

Measurement force: 150-300mg

Measuring needle tip radius: Standard 5 μ m (200 μ in), optional 2 μ m (80 μ in) or 10 μ m (400 μ in)

Testing method: sliding scan

Calibration:

Automatic software calibration standard: ISO4287

4、 Test parameters:

Three sampling lengths: 0.25mm, 0.8mm, 2.5mm

Two filters: 2CR and Gaussian

Evaluation length: 0.25mm -12.5mm (0.01 in -0.49 in) optional

Large stroke: 17.5mm

Test speed:

Test speed: 1mm/sec (0.04 in/sec)

回程速度： 1.5mm/sec(0.06in/sec)

Test parameters

Execution standards: ISO 4287, ISO13565-1, ISO13565-2, ASME46.1, JIS0601, N31007

ISO standards can measure 12 parameters: Ra, Rv, Rp, Rz, Rt, Rq, Rsk, Rmr, Rdq, Rpc, RSm, Rz1max

ASME standards can measure 11 parameters: Ra, Rv, Rp, Rz, Rt, Rq, Rsk, Rdq, RSm, Rpm, Rda

The JIS standard can measure 14 parameters: Ra, Rv, Rp, Rz, Rt, Rq, Rsk, Rmr, Rdq, RSm, RzJIS, Rc, Rku, Rdc

Other: R3z (Daimler Benz)

Testing unit: um/uin

5、 Optional attachments

Testing Platform:

Grade 00 marble slab: 400X250X70mm

Effective height: 280mm.

Adjustable Y-axis V-shaped iron

Adjustable range: ± 5mm

V-shaped iron with a length of 100mm

The SURTRONIC S116 has the following improvements compared to the SURTRONIC 25:

1. The battery has been changed from alkaline 9V to lithium rechargeable battery;

2. The display screen is a touch screen;

3. Can display test graphics;

4. SURTRONIC 25 can only test 10 parameters, while S116 can measure 12, 11, and 14 parameters under different standards (see technical parameters);

5. Previously, SURTRONIC 25 used potentiometers to calibrate test results, but now it has been changed to automatic software calibration. Easy to use;

6. The results (data and graphics) displayed on the screen can be rotated, making it easy to observe the test results from four directions;

7. The bottom of the instrument is V-shaped, making it convenient and reliable to test shaft components;

8. The test data storage has added the function of storing graphics;

9. It can be directly stored using a USB flash drive. A 4G capacity USB flash drive can store 39000 graphics and 70 batches of data, with each batch containing 100000 test data.

Taylor Hopson roughness tester Surtronic 1216 | Taylor