Siemens SIWAREX JB localized simulation junction box

Siemens SIWAREX JB localized simulation junction boxMade of stainless steel material. To connect the weighing sensors in parallel, a stainless steel SIWAREX JB junction box is required. Up to 4 weighing sensors can be connected in parallel in a junction box. SIWAREX JB junction boxes are available in standard and NEPSI versions.

Siemens SIWAREX JB localized simulation junction box

Order number: 7MH5001-0AC00/7MH5001-0AC01

technical specifications

SIWAREX JB junction box, stainless steel casing

cable gland

Weighing sensor 4 x M16

Signal cable 1 x M20

Allow ambient temperature

Operation -30 .. +60 ° C (‑22 ... 140 ° F )

The working temperature of commercial weighing machines is 10 degrees Celsius .. +40 ° C (+14 ... +104 ° F)

Transportation and Storage -30 .. +60 ° C (‑22 ... 140 ° F )

Protection level IP66, compliant with standard EN 60529

Design

The stainless steel junction box consists of a bottom shell and an upper cover. The casing has an IP66 protection level and is dustproof and splash proof. The cable is threaded through the gland. In the casing, screw type terminals are fixed on the connection board.

All parallel switch type weighing sensors must have the same internal resistance, characteristic values, and rated load. The values of these variables are not limited by the junction box. The weighing sensor can be connected to a 4-wire system.

This junction box supports four corner adjustment through potentiometers from the factory.

Beijing Yajielong Measurement and Control Technology Co., Ltd. provides the following models of weighing modules in stock:MH4900-2AA01The7MH4900-3AA01The7MH4910-0AA01The7MH4920-0AA01The7MH4950-2AA01The7MH4950-1AA01The7MH4960-2AA01The7MH4960-4AA01The7MH4960-6AA01The7MH4980-2AA01The7MH4980-1AA01The7MH4138-6AA00-0BA0The7MH4134-6LB00-0DA0