US PCB accelerometer paired with cable

US PCB accelerometer paired with cable037P30Our Advantages353B04 Single Axis Acceleration Vibration Sensor: Technical Parameters and Application Analysis

The 353B04 single axis acceleration vibration sensor is a high-performance measuring device widely used in various industrial and scientific research fields. This article will provide a detailed introduction to its technical parameters, performance characteristics, and main application areas to help users better understand and choose this sensor.

US PCB accelerometer paired with cable037P30 provides various product information services:technical parameters

1. Sensitivity: The sensitivity of 353B04 is (± 5%) 10 mV/g, which is 1.02 mV/(m/s ²). This means that at a unit gravity acceleration, the sensor output voltage is 10 mV, providing high-precision measurement data.

2. * * Measurement Range * *: The measurement range of this sensor is ± 500 g pk (± 4905 m/s ² pk), which can withstand large acceleration changes and is suitable for monitoring under various conditions.

3. * * Frequency Range * *: The frequency response is (± 5%) 1 to 7000 Hz, covering a wide range of application scenarios. At the same time, with an accuracy of ± 10%, the frequency range is extended to 0.7 to 11000 Hz, further enhancing its adaptability.

4. * * Sensing element * *: 353B04 uses quartz as the sensing element, utilizing its excellent piezoelectric effect to ensure high stability and reliability of the sensor.

5. * * Environmental conditions * *: The working temperature range of the sensor is -65 to+250 ° F (-54 to+121 ° C), and it can operate normally at this temperature. In addition, its protection level reaches IP67, with waterproof and dustproof capabilities, suitable for harsh environments.

6. * * Electrical Characteristics * *: The sensor requires an excitation voltage of 18 to 30 VDC, with a constant current excitation range of 2 to 20 mA. The output impedance is below 100 ohms to ensure the stability of signal transmission.

####Performance characteristics

1. * * High Resolution * *: 353B04 has a resolution of 0.003 g rms in the frequency range of 1 to 10000 Hz, which can accurately capture small vibration changes.

2. * * Low nonlinearity * *: The nonlinearity of the sensor is less than 1%, ensuring high-precision output throughout the entire measurement range.

3. * * Low lateral sensitivity * *: The lateral sensitivity is less than 5%, reducing the impact of non axial vibration on measurement results and improving data accuracy.

4. * * Durable * *: The sensor housing is made of titanium metal material and sealed by welding, enhancing its impact resistance and corrosion resistance.

5. * * Easy to install * *: The sensor measures 0.50 inches x 1.14 inches (12.7 millimeters x 29.0 millimeters) and weighs only 0.38 ounces (10.5 grams), making it compact and lightweight. The installation thread is 10-32 female, providing a stable fixing method.

####Application Fields

1. * * Mechanical equipment monitoring * *: 353B04 can be used for measuring and monitoring the vibration of bearings or casings of rotating machinery such as fans, steam turbines, coal mills, oxygen concentrators, generators, centrifuges, compressors, water pumps, motors, etc., to help prevent equipment failures and extend equipment service life.

2. * * Structural Testing and Product Testing * *: In the fields of structural testing, product vibration testing, drop testing, product quality testing, etc., 353B04 can provide accurate vibration and impact data to support scientific research and product development.

3. Environmental Protection and Industrial Automation: Sensors are widely used in industries such as environmental protection, petrochemicals, power electronics, metallurgical construction, coal, agriculture, health and epidemic prevention, and education and research, helping to achieve equipment status monitoring and process control.

4. Modal testing: The high-frequency response characteristics of 353B04 make it perform well in modal testing and accurately obtain the vibration modal parameters of the structure.

The 353B04 single axis acceleration vibration sensor has become an ideal choice for industrial measurement and scientific research fields due to its high sensitivity, wide frequency range, good environmental adaptability, and robust structural design. Whether it is mechanical equipment monitoring or structural testing, its performance can provide users with accurate and reliable data support.

Microphone sensor cable 012A30 PCB

Three way acceleration sensor with TEDS 1.0 function model Tld356A32

EXMHT622B01

641b01

113B26

111A22 produced by PCB company

356B21

Sensor PCb356B10

356B18+M034AY030JW+080A27

Signal line for PCB 208C05 sensor

352C33

PCB/378B02+079A06+079B21+012A10 including microphone, wind ball, pen cone, cable)

PCB 130F20

PCB 601M51

Microphone: 377B02 (microphone head)+426E01

PCB Piezotronics 086c03 Modal Impact Hammer

PCB 333B30

PCB 482C16 and 485B39

PCB 301A11

PCB 138A10 water pressure sensor

Vibration sensor PCB-M602D01

PCB JM352C68 002C50

66192CPZ1 PCB

M119C12

M109D12

Dynamic pressure sensor SM112A22

Signal cable 002A03 1m

Adapter 070A0510-32

112422

112A21

106B52

3125-O1A

3124-01A

3124-02A

686B74

686B71

686B61

686B02

686B11

686B14

686B02

686B11

686B14

102M206

108A02 108A04

003D10

003D20

012A10

PCB acceleration sensor wire PCB 010G30

PCB force sensor wire PCB 002C30PCB

Microphone BNC connector PCB 002T20

PCB Hammer Connection Line PCB 003D20

PCB 261B03

PCB M002AC015AC

351M31

PCB magnetic seat model: 080A30

Sensor: 357C71 Explosion proof

Cable: 013GN010GP

Cable: 045M19

Charge amplifier: 422M182

PCB:377a51

M602D01

PCB three-way acceleration base 080A

US PCB 641B02 with 6-meter cable

PCB CAL200

626B03

483C50

086E80

EXM603C01

353B15+003P10+084A14+018C10+070A02

PCB sensor: 356B21

4PIN cable: 034K10

Installation stud: 081A90

Adhesive base: 080A

378C20

003D10

003D20

M353B18

003C10PCB

PCB003C20

J356A43

M034AY003NF

PCBM 034 is 006 NF

CAL200

LXT1-SE-FF

357A08

086D20

039050-51201

480B10 signal conditioner

WHT356B01

PCB:356a09:

353B04

PCB cable 003P03

PCB-356A33

352B10

480B10

039050-51201

PCB pressure pulsation sensor, model 113B28, range 0-50psi (0-350kpa), quantity 3 pieces, threaded interface

086D20

EXM603C01+6 meters

3711F1150G

034K20

393B04

10 feet (3.05 meters), equipped with this 356B21 cable

PCB high-precision sensor cable 002P10

M352C65

PCB 356A15 accelerometer sensor

MEMS DC response acceleration

3741F122G

3741F1210G

US PCB 205C Force Ring Sensor

Sensor testing line MO34AY025N

333B310M with test induction line

US PCB | | Model: 357B03

003C20，

034K20

PCB-352C33 (including base and 15 meter cable) piezoelectric accelerometer

American PCB noise sensor 378B02

356b20 with 9-meter vibration line and magnetic seat

351M35

351b04

PCB Piezotronics 482B11

PCB Piezotronics113B21

356B41/NC