Danish Onrobot Claw RG2

Danish Onrobot Claw RG2
Onrobot is an electric gripper manufacturer based in Denmark, specializing in the development of plug and play electric grippers for collaborative robots such as Universal Robot. All products have obtained UR+certification. The main products are RG2 and RG6, which are adaptive electric gripper series with good compatibility with U-O robots. All grippers are easy to install, programmed, flexible to use, and have a high safety level. They are the true "assistants" of UR robots. The main points of RG2 and GR6 electric grippers are: 1. Only one cable is needed to connect with UR robots, plug and play; 2. It can operate in dual claw cooperation and only requires one cable; 3. Real time reading and feedback of the absolute width value of the clawed object; 4. The gripper can be installed on any 30 ° indexing within the range of 0-180 degrees in space, and both single and double grippers are acceptable; 5. It can automatically calculate the gripping load value and provide real-time feedback on the gripping force, and can automatically calculate the gripping tool point; 6. Real time feedback on the effectiveness of capture; 7. With depth feedback function, programming for grabbing workpieces on a flat surface is simple; 8. Support infinite loop usage on UR3; 9. UR+certification and strong compatibility with UR robot appearance.
：
In the laboratory, researchers need to conduct product testing on self-supporting gas springs in office chairs. The staff only need to send the test sample to the manual loading area, and all other work can be handed over to robots equipped with OnRobot end tools.
The OnRobot RG2 gripper is used in this laboratory, a flexible collaborative gripper with built-in OnRobot quick change device.
OnRobot+UR robot cooperates with AGV to laser mark and scan the samples to be inspected, sort the qualified samples, and take photos of the products through vision.
The R1 robot comes with its own vision and can take photos of the assembly table to ensure it remains empty. It is also equipped with multiple grippers that can quickly and accurately switch within 1 to 2 seconds.
The R2 robot is a tightening gun robot equipped with two tightening devices at the end, which cooperate to complete different tasks.
The R3 robot is used for visual inspection, and users can customize the cycle shooting time. It can monitor any subtle defects in the sample in real time, and the images are transmitted to the system or cloud in real time.
After the testing is completed, the robots cooperate to return the samples to their original positions and accurately complete the classification.
Danish Onrobot Claw RG2Advantage:
1. The brand new bracket design simplifies the direction control of the gripper while retaining excellent movement and placement stroke. The wiring passes through the quick change device, bypassing the side, and does not require reconnection or disconnection when changing tools;
2. The OnRobot RG2 robot gripper is customizable with finger tips, adjustable force and travel, automatic depth compensation (only available for U-Robot), automatic payload calculation (only available for U-Robot), and automatic tool point calculation (TCP) (only available for U-Robot). It has passed T? V certification and can seamlessly cooperate with the OnRobot dual quick change device and any gripper, helping you fully unleash the potential of the robot.
In the future, this intelligent testing mode will be replicated in over 70% of the TIC industry, creating intelligent, efficient, and accurate application scenarios.

Advantages and points of RG2-FT
RG2-FT is a version of the RG series that integrates force/torque sensors and fingertip proximity sensors, allowing you to accurately detect the position of objects. This is a gripper with enhanced sensing capabilities and added intelligence. Even if the parameters cannot be pre programmed, the robot and itself can be easily controlled and operated according to the operator's wishes. This can achieve true collaboration with human operators, providing support to operators like colleagues and ensuring hourly processing.
? SOPHISTICATED TECHOLOGY
The robot gripper that uses built-in force/torque and proximity sensors to detect objects ensures high safety during operation.
? IDEAL FOR FRAGILE MATERIAL HANDLING
Due to its sensitive clamping, this gripper is an ideal choice for handling fragile materials.
Integrated software
The gripper comes with pre integrated software that is easy to install and program, so even employees without technical backgrounds can easily set it up.
Clamping label
Detect the risk of slipping in advance.
Customizable finger tips
The gripper can handle objects of various sizes and shapes.
? DETECTS WORKPIECE
RG2-FT can accurately detect the position of objects. It can detect the risk of slipping in advance and produce through * * *'s testing.

Danish Onrobot Claw RG2

Danish Onrobot Claw RG2
Onrobot is an electric gripper manufacturer based in Denmark, specializing in the development of plug and play electric grippers for collaborative robots such as Universal Robot. All products have obtained UR+certification. The main products are RG2 and RG6, which are adaptive electric gripper series with good compatibility with U-O robots. All grippers are easy to install, programmed, flexible to use, and have a high safety level. They are the true "assistants" of UR robots. The main points of RG2 and GR6 electric grippers are: 1. Only one cable is needed to connect with UR robots, plug and play; 2. It can operate in dual claw cooperation and only requires one cable; 3. Real time reading and feedback of the absolute width value of the clawed object; 4. The gripper can be installed on any 30 ° indexing within the range of 0-180 degrees in space, and both single and double grippers are acceptable; 5. It can automatically calculate the gripping load value and provide real-time feedback on the gripping force, and can automatically calculate the gripping tool point; 6. Real time feedback on the effectiveness of capture; 7. With depth feedback function, programming for grabbing workpieces on a flat surface is simple; 8. Support infinite loop usage on UR3; 9. UR+certification and strong compatibility with UR robot appearance.
：
In the laboratory, researchers need to conduct product testing on self-supporting gas springs in office chairs. The staff only need to send the test sample to the manual loading area, and all other work can be handed over to robots equipped with OnRobot end tools.
The OnRobot RG2 gripper is used in this laboratory, a flexible collaborative gripper with built-in OnRobot quick change device.
OnRobot+UR robot cooperates with AGV to laser mark and scan the samples to be inspected, sort the qualified samples, and take photos of the products through vision.
The R1 robot comes with its own vision and can take photos of the assembly table to ensure it remains empty. It is also equipped with multiple grippers that can quickly and accurately switch within 1 to 2 seconds.
The R2 robot is a tightening gun robot equipped with two tightening devices at the end, which cooperate to complete different tasks.
The R3 robot is used for visual inspection, and users can customize the cycle shooting time. It can monitor any subtle defects in the sample in real time, and the images are transmitted to the system or cloud in real time.
After the testing is completed, the robots cooperate to return the samples to their original positions and accurately complete the classification.
Danish Onrobot Claw RG2Advantage:
1. The brand new bracket design simplifies the direction control of the gripper while retaining excellent movement and placement stroke. The wiring passes through the quick change device, bypassing the side, and does not require reconnection or disconnection when changing tools;
2. The OnRobot RG2 robot gripper is customizable with finger tips, adjustable force and travel, automatic depth compensation (only available for U-Robot), automatic payload calculation (only available for U-Robot), and automatic tool point calculation (TCP) (only available for U-Robot). It has passed T? V certification and can seamlessly cooperate with the OnRobot dual quick change device and any gripper, helping you fully unleash the potential of the robot.
In the future, this intelligent testing mode will be replicated in over 70% of the TIC industry, creating intelligent, efficient, and accurate application scenarios.

Advantages and points of RG2-FT
RG2-FT is a version of the RG series that integrates force/torque sensors and fingertip proximity sensors, allowing you to accurately detect the position of objects. This is a gripper with enhanced sensing capabilities and added intelligence. Even if the parameters cannot be pre programmed, the robot and itself can be easily controlled and operated according to the operator's wishes. This can achieve true collaboration with human operators, providing support to operators like colleagues and ensuring hourly processing.
? SOPHISTICATED TECHOLOGY
The robot gripper that uses built-in force/torque and proximity sensors to detect objects ensures high safety during operation.
? IDEAL FOR FRAGILE MATERIAL HANDLING
Due to its sensitive clamping, this gripper is an ideal choice for handling fragile materials.
Integrated software
The gripper comes with pre integrated software that is easy to install and program, so even employees without technical backgrounds can easily set it up.
Clamping label
Detect the risk of slipping in advance.
Customizable finger tips
The gripper can handle objects of various sizes and shapes.
? DETECTS WORKPIECE
RG2-FT can accurately detect the position of objects. It can detect the risk of slipping in advance and produce through * * *'s testing.

Danish Onrobot Claw RG2