Swiss Magtrol Load Measurement Bolt

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Swiss Magtrol Load Measurement Bolt $r $nMagtrol Load Measurement Bolt is a sensor with temperature compensation, used to measure loads and forces, and provide overload protection. These load plugs are installed in the machine instead of ordinary shafts, and they are equipped with strain gauges to generate signals proportional to the measured load

Product Details

For over 60 years, MAGTROL INC and MAGTROL SA have been continuously providing customers with high-quality products for testing, measuring, and controlling torque speed power, load force weight, tension, and displacement. MAGTROL INC, headquartered in the United States, specializes in motor testing equipment, hysteresis brakes, and clutches. MAGTROL SA, located in Switzerland, not only provides motor testing equipment .. More about MAGTROL, MAGTROL dynamometer, MAGTROL rotary transmitter in the United States

MAGTROL Company Introduction

For over 60 years, MAGTROL INC and MAGTROL SA have continuously provided customers with high-quality products for measuring and controlling torque, speed, power, load, force, weight, tension, and displacement. And it's motor testing equipment, hysteresis brakes, and clutches. MAGTROL SA, located in Switzerland, not only provides motor testing equipment, but also produces a series of sensors for measuring, monitoring, and controlling loads, forces, weights, and displacements MAGTROL provides testing and measurement solutions for customer rights with its extensive Youxiu sales and service team.

Magtrol load measuring bolt is a sensor with temperature compensation, used to measure load and force, and provide overload protection. These load plugs are installed in the machine instead of ordinary shafts, and they are equipped with strain gauges to generate signals proportional to the measured load

·Specifications range from 2.5-1250KN (0.28-140 tons)

·Allowable overload: 150% of nominal load

·Burst overload: 350% -700% of nominal load (depending on model)

·Made of highly corrosion-resistant stainless steel

·Not affected by external mechanical or chemical conditions (strain gauges installed inside the measuring bolt)

·Suitable for use in harsh environments

·Durable and sturdy structure, no maintenance required

·Suitable for repeated installation

Passed ISO9001 certification

safety

The highly safe Magtrol load measuring bolt is applied in various fields, including:

·Crane lifting equipment

·Mechanical industry

·Shipping, oil tankers, offshore oil extraction

·nuclear industry

·aviation

·chemical industry

Swiss Magtrol Load Measurement Bolt

Swiss Magtrol Load Measurement Bolt
Magtrol load measuring bolt is a sensor with temperature compensation, used to measure load and force, and provide overload protection. These load plugs are installed in the machine instead of ordinary shafts, and they are equipped with strain gauges to generate signals proportional to the measured load

model	LB 210 series	LB 230 series
mechanical properties
permitted Overload	150%	150%
Overload rupture point	500%	500%
Electrical Characteristics
Bridge impedance	350 ohms	700 ohms
Bridge wiring	single line	dual line
signal output	0.5 to 1.8 mV/V	0.5 to 1.8 mV/V
Accuracy (Full Scale)	0.5% to 0.8%*	< 0.4%
power supply	5 to 12 V DC / AC	5 to 12 V DC / AC
amplifier	external connection	external connection
Output connection	PG or connector	connection
Environmental characteristics
Protection level	IP 66	IP 67
Operating temperature	-25 ° C to+80 ° C
Storage temperature	-55 ° C to+125 ° C