(Interlayer) environmental protection and safety glass salt water spray corrosion test chamber

1(Interlayer) environmental protection and safety glass salt water spray corrosion test chamberpurpose

• (Interlayer) environmental protection and safety glass salt water spray corrosion test chamber(Export type) is a salt spray corrosion testing equipment that artificially simulates oceanic climate. It can perform accelerated corrosion performance change tests on various materials such as electrical equipment, LED photovoltaics, solar photovoltaics, metal materials, glass products, etc., including coatings, electroplating, inorganic and organic films, anodizing, rust oil and other anti-corrosion treatments. It is also one of the testing equipment for the "three protections" (humidity, salt spray, and mold) in artificial climate environments

II(Interlayer) environmental protection and safety glass salt water spray corrosion test chambermeet the standard

• Conduct relevant salt spray tests in accordance with national standards GB2423.17 "Environmental Testing Methods for Electrical and Electronic Products Ka: Salt Spray Test", IEC68-2-11 "Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Spray", and ISO9227 "Artificial Simulated Climate Corrosion Test - Salt Spray Test". This test chamber is designed and produced in accordance with the national standard GB10587 "Technical Conditions for Salt Spray Test Chambers".

III(Interlayer) environmental protection and safety glass salt water spray corrosion test chamberSpecification Model

4(Interlayer) environmental protection and safety glass salt water spray corrosion test chamberTechnical Specifications

• Model: KM-BL-Y/Q

• Specification: See above

• Temperature range: RT~+55 ℃;

• Salt spray settling amount: 1-2ml/h • 80cm2

• Salt spray spray test: NSS.ACSS

• Laboratory: 35 ℃± 1 ℃

• Saturated bucket: 47 ℃± 1 ℃

• Temperature uniformity: ≤± 2 ℃

• Temperature fluctuation: ≤± 0.5 ℃

• Corrosion test: NSS.ASCS

• Laboratory: 50 ℃± 1 ℃

• Saturated bucket: 63 ℃± 1 ℃

• Temperature uniformity: ≤± 2 ℃

• Temperature fluctuation: ≤± 0.5 ℃

• Load capacity: to be determined;

• Power supply: AC220V/380V ± 5%, 50/60HZ

• Installation power: 3.5/9KW

5(Interlayer) environmental protection and safety glass salt water spray corrosion test chamberStructural characteristics and configuration

• The inner shell of the testing machine is made of high temperature resistant and corrosion-resistant fiberglass plate (thickness 6mm, high temperature resistance up to 80 ℃) (shock resistant, impact resistant, smooth, easy to clean), with no leakage phenomenon.

• The opening of the box cover is a cylinder starting support, making it easy and comfortable to open and close.

• The saturated bucket adopts imported SUS # 304 stainless steel high-pressure resistant bucket, with excellent insulation effect.

• Nozzle: It is made of special glass nozzle and can be used for 4500 hours. The size of spray volume and spray angle can be adjusted.

• Spray tower: the spray tower is set in the middle of the laboratory to make the fog fall evenly. It can be adjusted to 1~2ml/80cm2/HR (average amount every 16 hours).

• Using indirect heating method, the heating device is made of titanium alloy material

• Control system: The temperature and humidity time controller adopts imported "RKC"/"YANGMING" digital display controller (button type) or industrial control touch screen+PLC programmable controller control (touch type button), with high control accuracy and good reliability. The display mode is LCD dot matrix color LCD screen display, with display resolution of temperature (0.1 ℃) and time (1min), temperature display range of 0-200 ℃, digital display with PID automatic calculation, and control error of ≤± 0.5 ℃.

• Imported rocker type buckle switch, capable of continuous buckle up to 20000 times.

VI(Interlayer) environmental protection and safety glass salt water spray corrosion test chamberSecurity protection measures

• When the control system detects the action of the following protective devices (single row), it should be able to automatically cut off the entire system and give an alarm prompt.

• Overtemperature protection device

• Reverse phase and phase loss protection device

• Non fuse switch overload protection

• Overload protection for blower motor

• Heater short circuit

• Water shortage protection device

• Line fuses and fully sheathed terminals

7(Interlayer) environmental protection and safety glass salt water spray corrosion test chamberquality assurance

• On site installation and debugging of equipment, and training of operating personnel for customers.

• If the product cannot function properly due to manufacturing quality issues within twelve months from the date of shipment, provided that the user complies with the product installation and usage rules, our company will provide free repairs for the user.

• For products outside the warranty period, our company provides long-term technical services.