Parker solenoid valve D1VW020DVJW91 has a short delivery time

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Electromagnetic valve is an industrial equipment controlled by electromagnetic force, which is an automation basic component used to control fluids. It belongs to actuators, and pneumatic solenoid valve is one of them. It controls the movement of the valve body to block or leak different oil discharge holes. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the oil pressure of the pneumatic solenoid valve is used to push the piston of the oil cylinder. In this way, the mechanical motion of the entire solenoid valve is controlled by controlling the current of the solenoid of the pneumatic solenoid valve.

Product Details

Parker solenoid valve D1VW020DVJW91 has a short delivery time

Parker Hannifin's solenoid valves and pneumatic diaphragm valves are widely used in various fields such as petrochemicals, rubber, automobiles, trains, electricity, hydraulic and pneumatic, food machinery, robots, control valves, etc.

D1VW is a directional valve with NG06 (CETOP 03/NFPA D03) installation specifications. Due to optimized flow channel design, it can achieve a flow capacity of up to 80 l/min with minimal pressure drop. The working pressure can reach up to 350 bar.

There are multiple valve core options to choose from, and multiple hydraulic circuits can be configured. The D1VW valve has a soft switching valve option for smooth switching. There is an additional damping hole on the solenoid valve reversing channel that can extend the reversing time.

Applicability:

1. Medium characteristics

1) Select different types of solenoid valves for gas, liquid, or mixed states;

2) Products with different specifications and medium temperatures may cause the coil to burn out and the sealing components to age, seriously affecting their service life;

3) The viscosity of the medium is usually below 50cSt. If it exceeds this value and the diameter is greater than 15mm, use a multifunctional solenoid valve; When the diameter is less than 15mm, use a high viscosity solenoid valve.

4) When the cleanliness of the medium is not high, a backwash filter valve should be installed in front of the solenoid valve. When the pressure is low, a direct acting diaphragm solenoid valve can be selected;

5) If the medium flows in a directional manner and backflow is not allowed, it needs to flow in both directions;

6) The medium temperature should be selected within the allowable range of the solenoid valve.

D1VW020BNJWL

D1VW020BNJWL91

D1VW020BNJWTI5N

D1VW020BNJWTI5N91

D1VW020BNTCF

D1VW020BNTPH

D1VW020BNTW

D1VW020BNTW91

D1VW020BNYPH

D1VW020BVJG91