Pirelli CL 6587 residual chlorine, chlorine dioxide, and ozone analyzer

Pirelli CL 6587 residual chlorine, chlorine dioxide, and ozone analyzer

CL6587isB&CThe new series of products developed by the company with 40 years of experience in instrument manufacturing and application, andB&CThe measurement electrodes or sensors related to the company are used in conjunction, suitable for measuring and controlling disinfectants in industrial, water treatment, scientific research and other processes.

This series of instruments andSZ283orCL790XTheOZ7901Suitable for measuring the concentration of oxidizing disinfectants, including effective residual chlorine, compound chlorine, total residual chlorine, chlorine dioxide, ozone, etc

Peroxyacetic acid, etc.

Key Features

measurement range

0 ÷200.0 ppb /Mg/l

0 ÷2.000 ppm / mg/l

0 ÷20.00 ppm / mg/l

0 ÷200.0 ppm / mg/l

0 ÷2000 ppm / mg/l

-10.0 ÷110.0 °C, - 14.0÷230.0 °F

Pirelli CL 6587 residual chlorine, chlorine dioxide, and ozone analyzer

Features:

display

multiple linesseveral linesmany lines

LCD

Display measurement values and status information, indicating the process status to the user. button

Special function buttons allow users to easily and quickly enter zero point, slope

Configure functions such as control. Operation Mode These two models of instruments have three modes: automatic, measuring, and analog

Switching provides a very user-friendly feature for installation, debugging, and use

Can choose. Software filtering

It has two-level software filtering, and users can set the filtering when

To make the measurement display more stable and reflect the process changes more accurately.Analog signal outputTwo way isolation

0/4-20mA

Output, editable, reversible, more flexible in application, meets various process control transmission needs. Control relay contacts The instrument is equipped with two configurable control relays, which can be controlled

Control modes (switch, pulse proportional, segmented pulse proportional)Configure equations, hysteresis, and delay, and control related equipment.

PID outputUsers can configure and control relay pulses through analog signal outputImplementation of proportional or intermittent pulse proportional configuration

PID

control Different control configurations can be made. alarm The instrument is equipped with two high and low alarm relays. When the process status exceeds

After the alarm configuration conditions are met, the alarm is triggered or other related devices are activated

Passive contact triggers an alarm. Dry contact signal input

Two external dry contact signal inputs can be used to maintain or activate

call the police. Self cleaning function

The instrument is equipped with a self-cleaning control relay, which can be used for self-cleaning

Cleaning equipment control.Wide width power moduleThe instrument adopts a wide power module, which can be used85-264VAC，

50/60HzAC power supply.If necessary, it can also be optionally installed9-36VDCDC power module or

12VAC-50/60Hz

6587Communication power module.Easy to installThe protection level of the entire series is

7687IP65Suitable for various installation methods such as wall hanging, guide rails, and circular pipe clamping,The protection level of the series panel is

IP65

Suitable for disk installation.Supporting electrodecan be withB&CThe company uses online effective residual chlorine, compound chlorine, total residual chlorine, and ozone electrodes (including polarographic film electrodes and constant voltage electrodes) in combination, and can also be used withPT100or

PT1000