Magnetic stirring heating plateThe working principle of the device follows Coulomb's law of magnetism, which states that two magnets separated by a certain distance do not require any traditional mechanical components due to the induction effect of the magnetic field. Through the coupling force of the magnets, power can be transmitted from one magnet to another, forming a non-contact torque transmission mechanism.
Magnetic stirring heating plateWhen working, the external magnet is driven to rotate by the electromechanical (or electromechanical reducer), and at the same time, another set of magnets and rotors enclosed in the isolation sleeve are coupled and driven to rotate synchronously, thereby transmitting external power to the internal rotor without contact or friction, and integrating with the lower shaft and stirring blade through a coupling to achieve the purpose of stirring. The pressure inside the kettle is supported by a reliable and static isolation sleeve, which forms a sealed chamber with the kettle to keep the medium in a closed state, thus achieving the purpose of static sealing, high pressure resistance, and no leakage.
Magnetic stirring heating plateInstructions for use
1. Connect the external power supply, turn on the power switch, and the indicator light will turn on. Place the test bottle (or other vessel) containing the solution and stirrer on the work panel, turn on the magnetic stirring switch, the corresponding indicator light will turn on, adjust the "magnetic" speed control knob to the desired speed. It can be used for magnetic stirring. If electric stirring is required, please first determine the clamping position of the test bottle (or other vessel), adjust and calibrate the position and height of the motor and fixture on the column, turn on the electric stirring switch, the corresponding indicator light will be on, adjust the "electric" speed control knob, and raise it to the desired speed to start electric stirring. When constant temperature stirring is required, set the temperature: press the SET button to set or view the temperature setting point. Press the SET key and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state and complete the temperature setting.
2. After the work is completed, place the speed control knob in the smallest position; Place the temperature control knob in a non working state, turn off the mixing switch and power switch, and cut off the power. Wipe the columns, work surfaces, fixtures, and sensors clean, and there should be no water droplets or dirt left on them.
