New product upgrade for high-voltage switch characteristic tester

New product upgrade for high-voltage switch characteristic tester

High voltage switch characteristic testerThe new equipment has entered the site for debugging, and the customer is very satisfied with our products and services!

High voltage switch characteristic testerTechnical Specifications

1.1Operating environment

input power 220V ± 10% 50Hz ± 10% atmospheric pressure 86-106kpa

Wen degree －10-40 ℃ humidity ≤ 80% RH

1.2Safety performance

insulation resistance ＞2MΩ

dielectric strength Power supply to chassis frequency1.5KV withstand voltage for 1 minute, without flashover or arcing.

1.3Basic parameters

time Between: range 20000.0ms minimum resolution 0.01ms

　　　 ① 200 MS gear 0.01ms±0.1ms

② 2000 MS gear 0.1ms±0.1ms

　　　　 　③ 20000 MS gear 1ms±0.1ms

quick Degree:Range 20.00m/s Minimum resolution0.01m/s

　 ① Within 0-2m/s ± 0.1m/s ± 1 word

② 2Above m/s ± 0.2m/s ± 1 word

line Cheng:

special point

uApplicable to all models produced domestically and internationallySF₆SwitchMechanical characteristic tests for GIS composite electrical appliances, vacuum switches, and oil switches.

uAnti-interference ability, inEven when the bypass busbar of a 500KV substation is live, it can be easily tested and accurately measured.

uAccelerometer(Optional), linear sensor, rotation sensor, installation is extremely convenient and simple.

uOnce the switch is activated, all data and corresponding waveform diagrams of the switch mechanical characteristic test are obtained.

uThe host can store on-site test data and has a real-time clock inside, making it easy to archive and save test dates and times.

uHost large screen, wide temperature range, direct perspective, background light LCD, full Chinese display of all data and maps, LCD contrast electronic adjustment, power-off memory.

uChinese menu operationEasy to use. The instrument has a built-in printer that can quickly print all data and graphs at any time.

uThe instrument is equipped with data analysis and management software, which can work withPC online operation, the test results can be output to various needle, laser or inkjet printers to print test reports, making on-site testing computerized.

uThe speed selection and customization functions for just opening and closing can be set as needed, analyzed arbitrarily, and applicable to speed measurement of any type of switch produced by any switch factory at home and abroad.