Introduction to Types of Digital Material Testing Machines

The WE-100B electro-hydraulic material testing machine is driven by a hydraulic power source and uses intelligent measurement and control instruments to collect and process test data. It consists of four parts: the test host, oil source (hydraulic power source), measurement and control system, and test equipment. The maximum test force is 100kN, and the accuracy level of the testing machine is better than level 1. It can meet the standard testing requirements of the national regulations on metal tensile testing, and can also perform tensile, compression, bending, shear and other types of tests on different materials or products according to other standards. It can obtain performance indicators such as tensile strength and yield strength of the tested materials.
It is a six column, dual space structure, with a tension space between the upper and lower crossbeams and a compression space between the lower crossbeam and the test bench. The test space is automatically adjusted by driving the lower crossbeam up and down through the rotation of sprockets and screws. The standard model is equipped with V-shaped and flat jaws for clamping cylindrical and flat specimens for tensile testing; The bottom end of the lower crossbeam of the standard model is equipped with an upper pressure plate, and the test bench is equipped with a lower pressure plate with a spherical structure, which can be directly used for compression testing.
The design of the host considers the possibility of expanding and assembling other fixtures to complete more experiments. For example, bolt clamps can be used for bolt stretching, bending clamps can be used for bending tests of round bars or plates, shear clamps can be used for shear strength tests of round bars, and anti bending, shear, splitting, elastic modulus instruments can be added in compression space for concrete and cement block tests.
The testing machine and its accessories comply with the requirements of GB/T228, GB/T2611, and GB/T3159 standards.
Product Parameters
Model: WE-100B Testing Machine Level: Level 1 (Level 0.5)
Maximum compressive strength test force: 100kN Host structure form: Six column host structure Oil source cabinet weight (kg): 160
Middle beam lifting speed (mm/min): 320 compression surface maximum spacing (mm): 500 parameter comparison
Stretching maximum distance (mm): 600 Piston stroke (mm): 200
Circular specimen clamping diameter (mm): Φ 6- Φ 22 Flat specimen clamping thickness (mm): 0-15
Bending test fulcrum maximum distance (mm): 300 Upper and lower pressure plate size (mm): Φ 110
Host dimensions (mm): 800 × 620 × 1850 Oil source cabinet dimensions (mm): 550 × 500 × 1200
Host weight (kg): 1400 Whole machine power (kW): 1.1

The WE-300B electro-hydraulic material testing machine is driven by a hydraulic power source and uses intelligent measurement and control instruments to collect and process test data. It consists of four parts: the test host, oil source (hydraulic power source), measurement and control system, and test equipment. The maximum test force is 300kN, and the accuracy level of the testing machine is better than level 1.
It can meet the standard testing requirements of the national regulations on metal tensile testing, and can also perform tensile, compression, bending, shear and other types of tests on different materials or products according to other standards. It can obtain performance indicators such as tensile strength and yield strength of the tested materials.
It is a six column, dual space structure, with a tension space between the upper and lower crossbeams and a compression space between the lower crossbeam and the test bench. The test space is automatically adjusted by driving the lower crossbeam up and down through the rotation of sprockets and screws. The standard model is equipped with V-shaped and flat jaws for clamping cylindrical and flat specimens for tensile testing; The bottom end of the lower crossbeam of the standard model is equipped with an upper pressure plate, and the test bench is equipped with a lower pressure plate with a spherical structure, which can be directly used for compression testing.
The design of the host considers the possibility of expanding and assembling other fixtures to complete more experiments. For example, bolt clamps can be used for bolt stretching, bending clamps can be used for bending tests of round bars or plates, shear clamps can be used for shear strength tests of round bars, and anti bending, shear, splitting, elastic modulus instruments can be added in compression space for concrete and cement block tests.
The testing machine and its accessories comply with the requirements of GB/T228, GB/T2611, and GB/T3159 standards.
Product Parameters
Model: WE-300B Testing Machine Level: Level 1 (Level 0.5)
Maximum compressive strength test force: 300kN Main structure form: Six column main structure Oil source cabinet weight (kg): 160
Middle beam lifting speed (mm/min): 320 compression surface maximum spacing (mm): 600 parameter comparison
Stretching maximum distance (mm): 700 Piston stroke (mm): 200
Circular specimen clamping diameter (mm): Φ 10- Φ 32 Flat specimen clamping thickness (mm): 0-20
Bending test fulcrum maximum distance (mm): 300 Upper and lower pressure plate size (mm): Φ 150
Host dimensions (mm): 800 × 620 × 1870 Oil source cabinet dimensions (mm): 550 × 500 × 1200
Host weight (kg): 1500 Whole machine power (kW): 1.8
Product Introduction
Product Introduction
The WE-600B electro-hydraulic material testing machine is driven by a hydraulic power source and uses intelligent measurement and control instruments to collect and process test data. It consists of four parts: the test host, oil source (hydraulic power source), measurement and control system, and test equipment. The maximum test force is 600kN, and the accuracy level of the testing machine is better than level 1.
It can meet the standard testing requirements of the national regulations on metal tensile testing, and can also perform tensile, compression, bending, shear and other types of tests on different materials or products according to other standards. It can obtain performance indicators such as tensile strength and yield strength of the tested materials.
It is a six column, dual space structure, with a tension space between the upper and lower crossbeams and a compression space between the lower crossbeam and the test bench. The test space is automatically adjusted by driving the lower crossbeam up and down through the rotation of sprockets and screws. The standard model is equipped with V-shaped and flat jaws for clamping cylindrical and flat specimens for tensile testing; The bottom end of the lower crossbeam of the standard model is equipped with an upper pressure plate, and the test bench is equipped with a lower pressure plate with a spherical structure, which can be directly used for compression testing.
The design of the host considers the possibility of expanding and assembling other fixtures to complete more experiments. For example, bolt clamps can be used for bolt stretching, bending clamps can be used for bending tests of round bars or plates, shear clamps can be used for shear strength tests of round bars, and anti bending, shear, splitting, elastic modulus instruments can be added in compression space for concrete and cement block tests.
The testing machine and its accessories comply with the requirements of GB/T228, GB/T2611, and GB/T3159 standards.
Product Parameters
Model: WE-600B Testing Machine Level: Level 1 (Level 0.5)
Maximum compressive strength test force: 600kN Main structure form: Six column main structure Oil source cabinet weight (kg): 160
Middle beam lifting speed (mm/min): 320 compression surface maximum spacing (mm): 600 parameter comparison
Stretching maximum distance (mm): 700 Piston stroke (mm): 200
Circular specimen clamping diameter (mm): Φ 13- Φ 40 Flat specimen clamping thickness (mm): 0-20
Bending test fulcrum maximum distance (mm): 300 Upper and lower pressure plate size (mm): Φ 200
Host dimensions (mm): 800 × 620 × 1900 Oil source cabinet dimensions (mm): 550 × 500 × 1200
Host weight (kg): 1800 Whole machine power (kW): 2.2
Product Introduction
Product Introduction
The WE-1000B electro-hydraulic material testing machine is driven by a hydraulic power source and uses intelligent measurement and control instruments to collect and process test data. It consists of four parts: the test host, oil source (hydraulic power source), measurement and control system, and test equipment. The maximum test force is 1000kN, and the accuracy level of the testing machine is better than level 1.
The WE-1000B electro-hydraulic material testing machine can meet the standard testing requirements of the national regulations on metal tensile testing, and can also perform tensile, compression, bending, shear and other types of tests on different materials or products according to other standards. It can obtain performance indicators such as tensile strength and yield strength of the tested materials.
The testing machine is a six column, dual space structure, with a tension space between the upper and lower crossbeams and a compression space between the lower crossbeam and the test bench. The testing space is automatically adjusted by driving the lower crossbeam up and down through the rotation of sprockets and screws. The standard model is equipped with V-shaped and flat jaws for clamping cylindrical and flat specimens for tensile testing; The bottom end of the lower crossbeam of the standard model is equipped with an upper pressure plate, and the test bench is equipped with a lower pressure plate with a spherical structure, which can be directly used for compression testing.
The design of the mainframe of the testing machine considers the possibility of expanding and assembling other fixtures to complete more experiments. For example, bolt clamps can be used for bolt stretching, bending clamps can be used for bending tests of round bars or plates, shear clamps can be used for shear strength tests of round bars, and anti bending, shear, splitting, elastic modulus instruments can be added in compression space for concrete and cement block tests.
The testing machine and its accessories comply with the requirements of GB/T228, GB/T2611, and GB/T3159 standards.
Product Parameters
Model: WE-1000B Testing Machine Level: Level 1 (Level 0.5)
Maximum compressive strength test force: 1000kN Main structure: Six column main structure Oil source cabinet weight (kg): 160
Middle beam lifting speed (mm/min): 320 compression surface maximum spacing (mm): 600 parameter comparison
Stretching maximum distance (mm): 700 Piston stroke (mm): 200
Circular specimen clamping diameter (mm): Φ 14- Φ 45 Flat specimen clamping thickness (mm): 0-40
Bending test fulcrum maximum distance (mm): 300 Upper and lower pressure plate size (mm): Φ 225
Host dimensions (mm): 900 × 700 × 2250 Oil source cabinet dimensions (mm): 550 × 500 × 1200
Host weight (kg): 2500 Whole machine power (kW): 2.2