Powder tablet pressMaintenance instructions:
1. Regularly inspect the components of the powder tablet press, 1-2 times a month. The inspection items include whether the worm gear, worm gear, bearings, pressing wheel, crankshaft, upper and lower guide rails and other moving parts rotate flexibly and wear out. If defects are found, they should be repaired and used in a timely manner.
2Powder tablet pressAfter a single use or shutdown, the remaining powder should be removed and the residual powder in the machine name section should be cleaned. If the machine has been out of use for a long time, the punching die must be completely removed and the machine must be wiped clean. The smooth surface of the machine should be coated with anti rust oil and covered with a cloth canopy.
3. The maintenance of the stamping die should be placed in a covered iron box, so that the stamping die is fully immersed in oil and kept clean to prevent rust and damage. Customized iron boxes can be used to pack each specification in one box, which can avoid installation errors during use and help to grasp the damage situation.
4Powder tablet pressThe place of use should be regularly cleaned, especially for pharmaceutical and edible tablet manufacturing, where there should be no dust or flying dust present.
