Analysis of Automatic Cleaning Technology for Laboratory Bottle Washing Machine-Chemical Instrument Network

With the development of technology,Laboratory Bottle Washing MachineDesigned to be more user-friendly and easy to use. When using a bottle washing machine, the first thing to check is whether the machine's switch, equipment transmission, and instrument indicators are normal, and to troubleshoot. Then adjust the bottle wheel clutch to the normal position, close the power switch, turn on the speed control switch to set the frequency, and when the motor speed reaches the set value. Open the water valve again to fill the liquid storage tank with water, open the saltwater free valve and injection water valve, turn on the water pump switch to fill the ultrasonic cleaning tank with water and maintain a certain water level, then open the air valve. When the water level in the tank reaches the specified level, turn on the ultrasonic switch, and the bottle washing machine will enter the bottle washing state. The correct operation process can ensure the cleaning quality of the machine and improve its service life.

The laboratory bottle washing machine involves cleaning equipment technology for various types of bottles. Including soaking and washing bottle mechanism, external brushing bottle mechanism, internal brushing bottle washing mechanism, and bottle body delivery mechanism, bottle inlet photoelectric control devices are respectively installed at the bottle inlet of the soaking and washing mechanism and the bottle inlet of the internal brushing mechanism; The soaking and washing mechanism is equipped with a motor, and a transmission device is set between the motor and the rotating frame shaft. A bottle feeding transmission device and a bottle discharging transmission device are respectively set between the motor and the bottle feeding device and the bottle discharging device; The bottle washing mechanism inside the bottle washing machine is equipped with a main motor, and a transmission device is set between the main motor and the rotating frame shaft. A bottle feeding transmission device is set between the main motor and the bottle feeding device.

The laboratory bottle washing machine achieves its respective functional requirements through mechanical transmission, with good synchronization and coordination. It realizes the orderly linkage between the rotation of the rack section, bottle feeding, bottle discharging, internal and external brushing actions, ensuring the normal operation of the equipment, saving software and hardware equipment costs, and facilitating maintenance. Use an automatic bottle washing machine to automatically clean the inside and outside of glass bottles with a brush; Spray clean water again and rinse the inside and outside of the bottle thoroughly; At the same time, it automatically scrapes off the trademark paper attached to the old bottle. Operated by one person, improves work efficiency, reduces workload, and improves working conditions.