BAKER Biosafety Cabinet from the United States provides technical support and safety assurance for P3 laboratory

BAKER Biosafety Cabinet Company in the United States produced biosafety cabinets in 1951. In the following 60 years, Baker Company has always dominated the design, development, research, and manufacturing of biosafety cabinet products in the world today. Its products have spread to various fields such as life sciences, clinical research, biotechnology, and medicine, making it an ideal brand for users.

1. Vertical laminar negative pressure machine, designed in accordance with NSF49 Class II Type A2 standard.

2. SUS304 stainless steel integrated molding operation space, seamless circular arc structure, easy to clean and maintain.

▲ 3. Equipped with MOMENTUM air curtain design, the Momentum air curtain design adopts a stainless steel airflow distribution plate installed under the HEPA filter to redistribute the filtered air flow direction, forming a 100FPM vertical fast air curtain close to the operator side, which has a larger airflow than the 55FPM airflow in other work areas, and can prevent the leakage of working airflow.

▲ 4. High wind speed air inlet can enhance sample and personnel protection; The high air intake ports on both sides are located inside the movable sliding door of the operating platform, with high air volume and speed. Can effectively prevent the leakage of gases, evaporated substances, and particles inside the control panel; And prevent external environmental gases from entering the work area.

▲ 5. 70% cycle, 30% exhaust laminar flow mode, with * unipressure air duct design, can maintain uniform laminar air pressure, thereby extending the service life of the filter and reducing airflow noise.

6. Equipped with a variable frequency motor and a Stediflow VFD (variable frequency drive) motor control design, the safety cabinet has low energy consumption, less heat generation, and operates more quietly. The Stediflow VFD motor control system can automatically compensate for online voltage fluctuations, abnormal airflow, and filter overload.

▲ 7. Negative pressure double-layer cable reserved holes can provide larger power instrument cables for passage or transmission pipelines. The negative pressure double-layer box structure is surrounded by negative pressure interlayers at the bottom, sides, and back of the entire working area, and any positive pressure pipeline must be covered by negative pressure; To prevent the leakage of polluted gases if the body is damaged.

8. Equipped with a safety system, when the movable sliding door exceeds the safety limit, there will be an audible alarm, and there is also a mute switch, which will be silent for five minutes.

▲ 9. Equipped with a differential pressure gauge, it can operate and display the current differential pressure on the control panel, making it easy to determine the safety of the operation; Higher reliability.

10. The bottom of the cabinet workbench is equipped with a stainless steel drain valve, which can promptly clean the contaminated liquid inside the cabinet workbench. It is easy to clean and non corrosive; This ensures the safety of the cabinet more effectively.

11. The seismic resistance index of the entire machine is designed according to the CBC2013 regulations in California, USA, providing a safer guarantee.

12. External dimensions (cm): 137 × 78 × 157 Internal dimensions (cm): 112 × 51 × 80