under normal circumstancesWuxi floating ball level gaugeThe floating blue screen paperless recorder ball has a draft depth, so as long as it can float up, the difference in liquid level measurement is not significant. However, when the required accuracy reaches a higher standard, the change in medium density cannot be ignored, because the draft of the floating ball directly affects the signal liquid level value inside the pipe. The Wuxi float level gauge should be installed in a position where the float moves up and down without obstruction. The tested medium should not contain ferromagnetic impurities. The float level gauge consists of two parts: a level sensor and a converter. It consists of several reed switches and resistors installed inside a ф 20 stainless steel tube, which are fastened to the outside of the measuring tube. The converter is composed of electronic modules and installed in the junction box of the sensor. The Wuxi float level gauge places a hollow float in the liquid, and when the liquid level changes, the float will produce the same displacement as the liquid level change. The displacement of the floating ball can be measured by mechanical or electrical methods, with a degree of ± (1-2)%. This type of liquid level gauge is not suitable for high viscosity liquids, and its output end has switch control and continuous output.