Wuxi floating ball level gaugeDesign one or more magnetic spring switches inside a sealed metal or plastic tube, and then thread the tube through one or more hollow floating rings with circular magnets inside. Use a fixed ring to control the floating ball and magnetic spring switch to move up and down within a certain range. Using the magnet inside the floating ball to attract the contact of the magnetic spring switch, generating the action of opening and closing, and controlling or indicating the liquid level.
Wuxi float level gauge is a commonly used flow measurement instrument, mainly used for detecting liquids, gases, steam and other media, and has certain applications in multiple industries. When using the liquid level gauge, we may generate some dirt and wear, which will affect the normal use of the Wuxi float level gauge. So when we use a level gauge, maintenance is crucial. Today, the editor will introduce the maintenance methods of a float level gauge in detail, hoping to help everyone.
In general, regular maintenance of factory equipment should be included in the workshop responsibility system. For the regular inspection of Wuxi float level gauges, we need to achieve a planned and regular preventive inspection. For example, periodically checking various indicators.
How to check, some people sayWuxi floating ball level gaugeOnce loaded into the storage tank, they are all plug-in, with the float inside the tank. How to maintain this? Do we need to open the tank and take it out?
Of course, this is not necessary. This is the advantage of these two types of liquid level gauges. In general, when operated correctly, the float does not require maintenance, which is also the quality assurance of our Jiujiu instrument products. Zui does not require maintenance or repair for at least 3 years. If the Wuxi float level gauge has a medium that is relatively special, such as viscous or has many impurities, it can also be easily maintained by simply removing the flange and extracting the float.
Daily maintenance only requires observing and recording parameters, checking whether the measured liquid level is roughly consistent with the actual liquid level, and observing whether there are any problems with the liquid level indication. If the recorded parameters are correct, it is considered maintenance. Because if it really needs to be cleaned or something like that, it is not advisable or practical, and it will be very troublesome. And putting it back in here may affect the measurement of the Wuxi float level gauge. Moreover, it does not require maintenance and upkeep, so only regular observation and recording are needed.
In addition to different contact forms, there are also various materials to choose from for Wuxi float level gauges: plastic, stainless steel 304/316 PVDF、 Spraying PTFE and other materials can be applied to different environments, each with its own advantages and disadvantages. For example, plastic material has the lowest cost, but can only be used in liquids with low temperature below 80 degrees and slight corrosion, while stainless steel 304 can be used in high temperature of 150 degrees, and high temperature of 200 degrees requires customization. in additionWuxi floating ball level gaugeThe two materials are plastic and stainless steel, which are used in strong acidic and alkaline environments. So this point needs everyone's attention.