Pressure controlled battery fixture (just a rack)

Tianjin Jiaxinhai Machinery Equipment Co., Ltd. is a high-tech enterprise dedicated to the research and development of pharmacopoeia analysis instruments and laboratory tablet presses. It was established in 2011 and has a history of more than ten years. Our company has a strong R&D team, comprehensive after-sales service, and a rich product system. The product is widely used in scientific research; Pharmaceutical and chemical industry; Environmental water quality testing; Food testing; Materials testing and other related fields.

The tablet press developed by our company adopts an integrated structure, with no sealed connection, fast pressurization, no pressure drop, and no oil leakage. It is widely used in industries such as batteries, superconductivity, cement, ceramics, catalysis, silicates, powder metallurgy, marine mud analysis, biochemical analysis, and new material research and development. In addition, it can be used in conjunction with analytical instruments such as calcium iron analysis, infrared spectroscopy (IR), X-ray fluorescence (XRF), etc., and can replace similar imported products.

Pressure controlled battery fixture (just a rack)Operation steps:

1. Place the sample into the mold

2. Assemble the mold properly

3. Place the mold into the pressurized fixture

4. Apply the required pressure to the mold

Pressure controlled battery fixture (just a rack)Technical Specifications:

Mold usage and maintenance:

Before each use of the mold, the surface of the mold should be wiped clean with dust-free paper to prevent the rust proof oil on the mold from affecting the test results of the sample. When applying pressure, be careful not to exceed the pressure that the mold can withstand. After using the mold, the samples on the mold should be cleaned in a timely manner to prevent corrosion of the mold. If not in use for a long time, the mold needs to be coated with anti rust oil and stored in a dry environment.

1. Place the mold in the center position of the tablet press, and do not exceed the mold's bearing capacity when applying pressure.

2. If there are sample residues on the surface of the mold that cannot be removed, please do not clean or soak them with chemical reagents;

3. If the mold is not used for a long time, anti rust oil can be applied to the surface of the mold to prevent rusting;

4. If the mold is not used for a long time, it needs to be stored in a dry environment.