300 degree dual plate electric heating mold, top and bottom pair

300 degree dual plate electric heating mold, top and bottom pairMainly for the molding of plastic and rubber samples. There are various specifications for the heating plate, including 180 × 180mm, 200 × 200mm, 300 × 300mm, 400 × 400mm, etc. The heating temperature is 300 ℃; Heating rate is approximately 5-10 ℃/min. Water cooling and cooling devices can be optionally selected, and the special size of the mold can be customized according to customer requirements, or it can be made at 500 ℃.

A pair of upper and lower 300 degree dual plate electric heating molds,Usage steps:

1. Place the sample to be molded between the upper and lower plates of the heating plate and press it firmly;

2. Adjust the temperature of the empty space on the right side of the mold thermostat to the temperature we need;

3. Place the heating mold into the tablet press and apply pressure to the desired level;

4. Open the flat mold and gently remove the pressed sample;

Technical Specifications:

Mold usage and maintenance:

Before each use of the mold, the surface of the mold should be wiped clean with dust-free paper to prevent the rust proof oil on the mold from affecting the test results of the sample. When applying pressure, be careful not to exceed the pressure that the mold can withstand. After using the mold, the samples on the mold should be cleaned in a timely manner to prevent corrosion of the mold. If not in use for a long time, the mold needs to be coated with anti rust oil and stored in a dry environment.

1. Place the mold in the center position of the tablet press, and do not exceed the mold's bearing capacity when applying pressure.

2. If there are sample residues on the surface of the mold that cannot be removed, please do not clean or soak them with chemical reagents;

3. If the mold is not used for a long time, anti rust oil can be applied to the surface of the mold to prevent rusting;

4. If the mold is not used for a long time, it needs to be stored in a dry environment.