1Spin CoaterPreparation before startup

Check if the power and air supply connections of the equipment are secure, without looseness or damage.

Confirm that the coated substrate is clean and dry, free of impurities such as stains and scratches that may affect the coating effect.

According to the coating requirements, select the matching fixture and install it in place to ensure that the substrate is fixed and stable.

2、 Core operational steps

Start the power according to the device manual, wait for the self check of the device to complete, and enter standby mode.

Use a dropper or specialized injection tool to evenly drop an appropriate amount of coating solution onto the center of the substrate.

Set parameters such as rotation speed and coating time (it is recommended to start at low rotation speed for beginners), and start the coating program.

After coating is completed, wait for the equipment to come to a complete stop before carefully removing the substrate to avoid liquid splashing or substrate damage.

IIISpin CoaterKey points of safety and maintenance

Wear protective gloves and goggles during operation to prevent the coating liquid from coming into contact with the skin or splashing into the eyes.

Do not touch rotating parts during equipment operation to avoid mechanical damage.

After each use, clean the equipment workbench and fixtures in a timely manner, and dry off any residual coating liquid.

Regularly inspect key components such as equipment motors and bearings, keep the equipment clean and dry, and extend its service life.