EXF Coating Thickness GaugeMainly used for measuring the thickness of coating on metal materials, non-destructive testing methods are commonly used. However, due to the introduction of many measurement errors caused by factors such as the measurement object, measurement method, measurement environment, and instrument equipment, it is necessary to conduct uncertainty analysis to ensure the accuracy and reliability of the measurement results.
This product can simultaneously measure non-magnetic coatings (such as paint, ceramics, chromium, etc.) on magnetic substrates (such as steel and iron), as well as non-conductive electroplating coatings (such as paint, etc.) on non-magnetic metal substrates. This instrument is equipped with a high-precision integrated probe, which uses both electromagnetic induction and eddy current effects to automatically detect the properties of the substrate and the thickness of the coating layer, and quickly displays the results through a dot matrix LCD. At the same time, measurement data can be grouped and saved, and statistical values can be displayed in real-time. Users can set upper and lower limit alarm values, zero calibration, and multi-point calibration for each group separately. The brand new multi-point calibration and zero calibration make it very convenient for you to calibrate at any time. Standardize the menu to ensure that you can easily use it.
Measurement and composition analysis of thickness for industrial coatings on plastic products, coatings on electronic materials (connectors, semiconductors, circuit boards, capacitors, etc.), coatings on steel materials (iron, cast iron, stainless steel, low-alloy, surface treated steel plates, etc.), coatings on non-ferrous metal materials (copper alloys, aluminum alloys, lead alloys, zinc alloys, magnesium alloys, titanium alloys, precious metals, etc.), and various other coatings.
EXF Coating Thickness GaugeBy using X-ray fluorescence analysis technology, the thickness of various metal coatings, including single-layer, double-layer, multi-layer, and alloy coatings, can be determined, and the composition concentration of the plating solution can be determined.
EXF Coating Thickness GaugeIt is a spectral analysis method, belonging to physical analysis methods. When the sample is irradiated with X-rays, the atoms of the coating or substrate material elements contained in it will emit their own characteristic X-rays after being excited, and different elements have different characteristic X-rays; After detecting these characteristic X-rays, the detector converts their optical signals into analog electrical signals; Convert the analog electrical signal into a digital signal through an analog-to-digital converter and send it to a computer for processing; The special application software of the computer determines the types of elements contained in the tested coating sample and the coating thickness of each element through data processing based on the obtained spectral peak information.
EXF Coating Thickness GaugeCan detect the thickness of common metal coatings without the need for sample pretreatment; The analysis time is short, only a few tens of seconds, and the thickness of each metal coating can be analyzed; The dynamic range of analysis and measurement is wide, ranging from 0.005 μ m to 60 μ m.