-
E-mail
yibao@szyibao.com.cn
-
Phone
18675539088
-
Address
312, Shangshuijing Comprehensive Building, 333 Jihua Road, Jihua Street, Longgang District, Shenzhen City, Guangdong Province
Shenzhen Yibao Technology Co., Ltd
Operation method and common troubleshooting solutions for B3011A electrostatic discharge simulator
Date: 2025-12-19Read: 1
B3011A Electrostatic Discharge SimulatorIt is a portable electrostatic discharge simulator suitable for ESD immunity testing of consumer electronics and IoT devices. It is easy to operate, but it still needs to be used in a standardized manner to ensure the effectiveness of the test.
Standard Operating Procedure:
Connect the grounding wire to the reference grounding plate;
Select discharge mode (contact/air), voltage (such as ± 4kV), and polarity;
Press and hold the trigger to complete a single discharge, or activate the automatic sequence mode;
Save the results or export the logs after testing.
Common problems and solutions:
Unable to power on: Check if the lithium battery is depleted and charge for more than 2 hours using the matching charger.
Discharge without sparks/no sound: Confirm that the voltage has been set correctly; If it is still ineffective, it may be due to the failure of the internal energy storage capacitor and requires repair.
Unstable discharge voltage: High environmental humidity (>60% RH) can lead to unreliable air discharge. It is recommended to test in an environment of 30-50% RH.
Mistriggering or automatic discharge: The trigger micro switch is stuck, clean or replace the gun body components.
Special attention: Do not operate without grounding, otherwise it may damage the tested equipment or the simulator itself. In addition, although B3011A supports a relatively high ± 15kV, it is recommended to gradually increase the voltage from low voltage during daily testing to avoid the breakdown of sensitive ICs by one-time high-energy discharge.
Regularly using current targets and oscilloscopes to verify discharge waveforms is the core of ensuring testing compliance. Mastering the correct operation and basic troubleshooting can fully unleash its potentialB3011A Electrostatic Discharge SimulatorValue in research and quality inspection.