Introduction to the advantages of EKV110 kinematic viscosity tester

About Us

Shenzhen United Jiali Technology Co., Ltd

E-mail
1785535884@qq.com
Phone
18988754036
Address
2nd Floor, 439 Ailian Road, Longgang District, Shenzhen

Date: 2017-12-23Read: 2

EKV110Kinematic viscosity testerUsing a digital temperature controller to control the bath temperature, the temperature setting is convenient and reliable (see the temperature controller manual for operating steps). When the bath temperature is lower than the set value, the temperature controller controls the solid-state regulator to operate the heater, causing the bath temperature to rise; When the bath temperature is higher than the set value, the temperature control meter controls the solid-state regulator to stop the heater from working, so as to keep the bath temperature constant at the set value. This instrument is suitable for measuring the kinematic viscosity of transparent and opaque liquids (including crude oil, light and heavy fuel oil, lubricating oil additives, etc.).

Advantages of a kinematic viscosity tester:

1.The instrument adopts a hardware system consisting of an industrial control computer and a microcontroller. The microcontroller is used to achieve constant temperature control and viscosity testing, with high real-time performance, making the test results more accurate.

2.The operating interface consists ofTFTComposed of LCD screen, touch screen, metal waterproof keyboard, and trackball.

3.The main components of the instrument are made of imported materials, and the key components are made of imported components, making the instrument more stable and reliable.

4.Wide measurement range for kinematic viscosity,Each viscometer is designed with three detection bubbles, which have100The viscosity measurement range is doubled, and the instrument includes two viscometers. Each viscometer is calibrated with American Kenergy kinematic viscosity standard oil before leaving the factory.

5.Automatic injection is equipped with two injection trays, each equipped with12One injection hole, users can install it all at once24Conduct a test on an oil sample.

6.Single constant temperature bath,Dual viscosity meter design, constant temperature range:20℃～100℃,Adjustable throughout the entire range.

Last Article: The difference between pour point and flash point of lubricating oil

Next Article: Observation and recording during operation of petroleum product distillation analyzer