feature
The new 20 GHz option can extend the frequency range of the E5071C ENA series network analyzer to 20 GHz. The new 20 GHz option supports two configurations: dual port (option 2K5) and four port (option 4K5), which can be used to measure various components such as WLAN and WiMAX? 、 The third harmonic of passive components in UWB or any 4G technology.
new features
E5071C ENA Network Analyzer Manual
Discussion on Calibration, Application, and Programming Issues: Network Analyzer Forum
Select attachment: Network analyzer attachment
Support: ENA series services and support homepage
E5071C 8.5G RF Network Analyzer 9kHz-8.5GHz
The Agilent E5071C network analyzer provides accurate measurement capabilities for RF devices. Its advanced architecture achieves multi port measurement by reducing the number of scans, further improving testing throughput.
Main technical indicators
Frequency range: 300 kHz to 8.5GHz
Harmonic: -25 dBc [3]
Maintain a dynamic range of 125 dB at the test port (typical value)
Wide dynamic range: Dynamic range on test port>123 dB (typical value)
Extremely fast measurement speed: 39 ms (for dual port calibration, scanning 1601 points)
Low trace noise: 0.004 dB rms (at 70 kHz IFBW)
Integrated 2 and 4 ports with balanced measurement capability
Provide frequency options: from 9 kHz/100 kHz (with bias T-connector) to 4.5 GHz/8.5 GHz
Scanning speed: 9.6 microseconds per point
Trace noise: 0.001 dB rms
Integrated 2, 3, and 4 ports with balanced measurement capability
Fixture embedding/reverse embedding and port characteristic impedance conversion
Frequency bias mode for frequency conversion equipment
Built in Visual Basic for Applications (VBA)
Measurement Wizard Assistant Software
technical indicators
Wide dynamic range: The dynamic range on the test port is>123 dB (typical value)
Extremely fast measurement speed: 41 ms, performs full dual port calibration, scans 1601 points
Extremely low trace noise: 0.004 dB rms, at 70 kHz IFBW
feature
Built in Visual Basic for Applications (VBA)
Powerful analysis and error correction capabilities
Upgrade all available ENA options at any time
Option configuration
E5071C-240 dual port tester 9KHz-4.5GHz without bias T-connector
E5071C-245 Dual Port Tester 100KHz-4.5GHz with Biased T-connector
E5071C-440 4-port tester 9KHz-4.5GHz without bias T-connector
E5071C-445 4-port tester 100KHz-4.5GHz with bias T-connector
E5071C-280 dual port tester 9KHz-8.5GHz without bias T-connector
E5071C-285 Dual Port Tester 100KHz-8.5GHz with Biased T-connector
E5071C-480 4-port tester 9KHz-8.5GHz without bias T-connector
E5071C-485 4-port tester 100KHz-8.5GHz with bias T-connector
E5071C-008 Frequency Bias Mode
E5071C-010 Time Domain Analysis Capability
E5071C-790 Measurement Wizard Assistant Software
E5071C-1E5 high stability time base