NDJ-2CVInstructions for User Operation and Preparation of Rotational Viscometer

NDJ-2CVThe Color Screen Series Rotational Viscometer is produced by our companyNDJ-SUpgraded product of series digital rotary viscometer. This series of instruments adopts advanced mechanical design technology, manufacturing process, and microcomputer control technology, with precise data acquisition; The monitor adopts high-definition color screen and high brightnessLCDLCD screen, clear data display.

This series of instruments has the characteristics of high measurement sensitivity, reliable test results, small sampling volume, easy operation, and beautiful appearance. It is a precision instrument used to measure the absolute viscosity of Newtonian liquids and the apparent relative viscosity of non Newtonian liquids. It can be widely used in chemical raw materials such as oils, paints, plastics, drugs, food, coatings, adhesives, glue meters, resins, solder paste, red glue, etc.

Shanghai WuxiangNDJ-2CVInstructions for Operation and Preparation of Rotational Viscometer Instrument

1Prepare the liquid to be tested and place it in a position with a diameter not less than80mmThe height shall not be less than125mmIn a beaker or straight cylindrical container.

2Accurately control the temperature of the measured liquid.

3Carefully adjust the level of the instrument, check if the level bubble of the instrument is centered, and ensure that the instrument is in a horizontal working state. (Install protective frame)

4Refer to the range table and select the appropriate rotor to screw into the rotor connector (install to the right and remove to the left).

5Slowly adjust the lifting knob to adjust the height of the rotor in the measured liquid until the liquid mark on the rotor (in the middle of the groove) is level with the liquid level.