-
E-mail
shtaifan@163.com
-
Phone
15921940737
-
Address
No. 36, Lane 379, Hongmei South Road, Minhang District
Shanghai Taifan Instrument Technology Co., Ltd
Can't you use a large capacity bottle mouth separator? Quick, come over here
Date: 2025-09-14Read: 1
A large capacity bottle mouth liquid separator is a common laboratory instrument, mainly used for liquid distribution, sampling, and precise measurement of liquids during experimental processes. This type of instrument is usually made of high-quality glass or plastic, with good corrosion resistance and stability, and is suitable for various chemical experiments.
Large capacity bottle mouth separatorThe structural composition of:
1. Bottle body: The bottle body is the main part of the liquid separator, usually made of high transparency glass or plastic material to ensure the visibility of the liquid and the durability of the instrument. The bottle body usually has a large capacity, with common capacities being 1 liter, 2 liters, or larger.
2. Bottle mouth: The bottle mouth is a key part of the liquid separator, with precise scale lines used to calibrate the volume of the liquid. The bottle mouth is generally designed as a wide mouth type, which facilitates the addition and sampling of liquids.
3. Distributor: Distributor is the part of a bottle mouth distributor used to guide the flow of liquid. It is usually a transparent glass tube with a certain degree of curvature to ensure stable and uniform liquid flow rate.
4. Piston or valve: The bottle mouth of a liquid separator is usually equipped with a piston or valve device to regulate the flow rate of the liquid. This device can accurately control the outflow of liquid, ensuring accuracy during the experimental process.
5. Base: In order to ensure the stability of the separator, many models of separators are equipped with a base. The base can prevent the instrument from tilting and ensure the stability of the liquid during distribution.
Instructions for using a large capacity bottle mouth separator:
1. Check the equipment: Before using the separator, first check whether the bottle mouth, separator tube, piston and other components are intact and undamaged. Ensure that there are no cracks or other damages at the bottle mouth to avoid liquid leakage or experimental failure.
2. Prepare the liquid: Prepare the liquid that needs to be dispensed according to the experimental requirements. Ensure that the properties of the liquid do not cause damage to the separator. For corrosive liquids, plastic material separators can be chosen.
3. Pour the liquid: Slowly pour the liquid into the mouth of the separator bottle. Avoid pouring too quickly to prevent liquid overflow or bubble formation. Ensure that the height of the liquid does not exceed the maximum mark marked on the bottle mouth.
4. Adjust flow rate: Adjust the valve or piston at the bottle mouth according to the required distribution amount to control the flow rate of the liquid. Accurate flow control is a major feature of bottle mouth separators.
5. Liquid distribution: Gently rotate or push the adjustment device of the liquid separator to allow the liquid to flow out according to the predetermined amount. The amount of liquid dispensed can be determined by observing the scale line on the bottle mouth.
6. Cleaning the separator: After use, the separator should be cleaned in a timely manner, especially the bottle mouth and the separator tube, to avoid the influence of liquid residue on the next experiment. For liquids that are difficult to clean, specialized cleaning agents can be used for cleaning.