-
E-mail
zhongpanpan@shjc17.com
-
Phone
15821711153
-
Address
No. 123 Xinjin Road, Qingpu District, Shanghai
Shanghai Jiecheng Experimental Instrument Co., Ltd
Tips and maintenance knowledge for using a vertical vacuum drying oven
Date: 2025-07-18Read: 3
Vertical vacuum drying ovenIt is an efficient drying equipment widely used in fields such as scientific research, medicine, electronics, and chemical engineering, especially suitable for samples that are sensitive to high temperatures, prone to oxidation, or require rapid removal of moisture and solvents. Compared to ordinary blast drying ovens, vacuum drying can achieve more efficient drying effects at lower temperatures, avoiding sample deterioration or structural damage. However, to fully utilize its performance, proper use and regular maintenance are crucial.
1、 Usage skills
1. Reasonably set the vacuum degree and temperature
The key to vacuum drying lies in controlling the vacuum degree and temperature. Suitable vacuum pressure (usually between -0.06 and -0.1MPa) and heating temperature should be set according to the characteristics of the sample. For thermosensitive substances, it is recommended to first evacuate and then raise the temperature to reduce the risk of sample oxidation.
2. Arrange the samples in an orderly manner to avoid accumulation
The samples should be evenly placed on the shelf, maintaining a certain distance to avoid direct contact with the box wall, ensuring smooth airflow and even heat distribution. At the same time, do not overload to avoid affecting the vacuum effect and drying efficiency.
3. Preheating and vacuuming sequence
The correct operating procedure is to first place the sample into the box and close the box door, then start the vacuum pump for vacuuming treatment, and turn on the heating function after reaching the required vacuum degree. This can effectively prevent the sample from rapidly evaporating or decomposing due to high temperature.
4. Avoid frequent unboxing
Try to avoid opening the box door during the drying process to avoid damaging the vacuum environment and prolonging the drying time. To observe the status of the sample, it can be viewed through the observation window or the equipped monitoring system.
5. Slowly release air after completing the operation
After drying, the heating system should be turned off first, and the box should be cooled to a safe temperature before slowly releasing air to prevent the sample from scattering or the glassware from breaking due to excessive pressure difference.
2、 Daily maintenance knowledge
1. Regularly clean the inner cavity and shelves
After use, residues should be promptly cleaned to keep the box clean. A soft cloth dipped in neutral cleaning agent can be used to wipe, avoiding the use of highly corrosive cleaning agents to prevent damage to the stainless steel material.
2. Check the integrity of the sealing ring
The sealing ring is an important component for maintaining a vacuum environment and should be regularly inspected for aging, deformation, or foreign object attachment. If there are any problems, they should be replaced in a timely manner to ensure sealing performance.
3. Maintain the connection between the vacuum pump and the pipeline
The vacuum pump is one of the core components of the vacuum drying oven, and it is necessary to regularly check the oil level, filter screen, and connecting pipes for blockages or leaks. If necessary, maintenance or replacement should be carried out.
4. Pay attention to the safety of the electrical control system
Regularly check whether the power cord, temperature control instrument, and alarm device are working properly. If any abnormalities are found, immediately stop the machine for maintenance to avoid safety hazards.
By mastering scientific usage techniques and performing daily maintenance, not only can we improveVertical vacuum drying ovenThe work efficiency can also extend the service life of the equipment, ensuring the accuracy and stability of experimental data. For laboratories and production enterprises, standardized operation and good maintenance are important manifestations of improving overall management level.