-
E-mail
610885490@qq.com
-
Phone
18789494880
-
Address
Zhangba Street, High tech Zone, Xi'an City, Shaanxi Province
Shaanxi Rugao Electric Co., Ltd
The key role and operational precautions of high-speed rescue sound and light alarm
Date: 2025-09-16Read: 37
High speed rescue sound and light alarmIt is a "life warning light" used in scenarios such as highway accident rescue and vehicle clearance. Through high-intensity visual (flashing) and auditory (alarm sound) signals, it conveys emergency information of "forward rescue" to rear vehicles, opening up a safe working area for rescue personnel, trapped drivers and passengers, and clearance equipment. Its correct use is directly related to rescue efficiency and the safety of on-site personnel.
1、 Key role:
On the highway, if there is no effective warning after an accident or malfunctioning vehicle stops, the vehicles behind (especially at night or in rainy or foggy weather) may experience a secondary collision due to unclear vision or delayed response, resulting in increased casualties. The function of the rescue sound and light alarm is to forcibly attract attention through "sound and light linkage" - the flashing signal (usually alternating red and blue colors, frequency ≥ 2Hz) can be clearly recognized from 200 meters away, the alarm sound (frequency 300-500Hz, similar to a fire truck siren) has strong penetration, can penetrate rain and fog (still effective when visibility<100 meters) and construction noise (such as crane operation sound). For example, in the rescue of a rear end truck accident at night, after the rescue personnel turn on the alarm, the vehicles behind can slow down and change lanes 150 meters in advance, buying valuable time for crane lifting and the transfer of the injured.
2、 Precautions for operation:
1. Installation location and timing: The alarm should be placed 50-100 meters upstream of the rescue site (adjusted according to the speed limit, for example, 100 meters is recommended for sections with a speed limit of 120 km/h), and preferably fixed on the top of the rescue vehicle (height ≥ 2.5 meters) or on a dedicated triangular warning stand (reflective surface facing back). The timing of activation should be immediately initiated upon arrival at the scene (even before setting up a warning zone) to ensure that vehicles behind receive warnings in the first instance.
2. Mode selection: Conventional rescue can choose "intermittent flashing+intermittent alarm" (such as flashing twice every 3 seconds, alarm sounding for 1 second and stopping for 2 seconds), to avoid long-term continuous sound waves causing auditory fatigue for drivers; At night or in rainy or foggy weather, "continuous strong flashing+high-frequency alarm" (flashing frequency ≥ 4Hz, alarm volume adjusted to a higher level) should be activated, and multiple warnings should be formed with reflective cones (spacing ≤ 5 meters).
3. Power and battery life: The device usually uses a car mounted 12V power supply or a built-in lithium battery (battery life ≥ 8 hours). Before rescue, the battery level should be checked (if the battery level is less than 30%, it should be charged or replaced in a timely manner) to avoid power outages during operation. Some models support solar charging panels (suitable for long-term duty scenarios), which can extend the battery life.
4. Safety protection: Operators need to wear reflective vests (to enhance their visibility) and avoid standing between the alarm and the direction of incoming vehicles (to prevent being accidentally hit by vehicles behind); If encountering strong winds (wind speed>8 levels), it is necessary to reinforce the alarm bracket (to prevent tipping) to avoid blocking the flashing surface.
5. Shutdown standard: After the rescue operation is completed and the warning area is removed, the alarm sound should be turned off first (to prevent noise pollution), and then the flashing signal should be turned off; When storing, check the appearance of the equipment (if there is any collision deformation, it needs to be repaired in a timely manner). The lithium battery should be charged to more than 50% for storage (when not in use for a long time, it should be charged and discharged every 3 months).
masterHigh speed rescue sound and light alarmThe key points of operation can not only improve the safety factor of the rescue site (reducing the occurrence rate of secondary accidents by more than 60%), but also be responsible for the lives of rescue personnel and drivers. It is a common equipment for emergency response on highways.