PerkinElmerMS2400™ SQbeStandard configurationSMARTsource™(Simple)Maintenance and disassembly）technologyJust gentlyOne twistSMARTsource，Users can remove the ion source andMSThe ion lens of the system entersLine maintenance.The ion source can be easily removed from the front of the instrumentNo need to use a quadrupole or detection systemExposed to the external environment.

Based on its buckle technologyThe ion source can be completely disassembled and reassembled without the need for any toolsNewly assembled. It also provides users with three optionsIn order to quickly return to the original performance level:

1Replace the contaminated ion source with a backup sourceAfter removing the ion source, it only takes a few seconds to startVacuum pumping.

2Disassemble contaminated ion optical components and replace them with clean optical kits,Just a few minutesYou can start vacuuming, and the previously contaminated ion optical components can also be cleaned.

3Disassemble and polish the ion source and ion optical components, and then reassemble them.

after disassemblyAll key aspects of ion sourceAll components are clearly labeled,withEnsure that it can be assembled correctly every time.