The scene of precision measurement has never been limited to fixed laboratories. From rapid detection next to the production line to precise analysis in the research and development center, different scenarios have put forward differentiated requirements for the measurement stroke, body size, and operational convenience of imaging instruments.Ningbo YixinBased on in-depth research on measurement scenarios in various industries, Ningbo Guangliang Shuzhi provides services for its subsidiariesNingbo YixinThe Ningbo Light Intensity Imager has created a multi-dimensional travel adaptation solution, which can provide equipment and services that meet the needs of both harsh workshop environments and fine laboratory measurements.

The production workshop is one of the most frequently used scenarios for imaging equipment, and the measurement requirements here are based on“Fast, efficient, and anti-interference”As the core, but also limited by workshop space, the body size of the imaging device cannot be too large, which affects the measurement range“space utilization”High demands have been put forward.Ningbo YixinNingbo Guangliang Shuzhi has launched a solution for this scenario“Compact large stroke”Series imaging equipment, its representative modelsATL-6050Adopting an integrated body designX/YAxis travel achieved600mm×500mmAt the same time, the body only occupies an area of1.2㎡, saving compared to traditional same journey equipment30%The space. The bottom of the equipment is equipped with shock-absorbing foot pads, which can effectively resist the interference caused by the vibration of workshop machine tools, even inZaxis180mmMeasurements are taken under the maximum travel range, and data fluctuations can also be controlled within0.001mmWithin.

The workshop of a certain automobile parts manufacturing enterprise once faced such a problem: the size of the gearbox housing it produced was550mm×480mmTraditional small-scale imaging equipment needs to be divided3Secondary splicing measurement is required to complete the inspection of a workpiece20Minutes, unable to match the pace of the production line; However, ordinary large stroke imaging devices are too bulky to be placed next to the production line. upon introductionNingbo YixinNingbo Light Intensity ImagerGL-6050CAfterwards, the device covered the full-size measurement of the gearbox housing in one go, reducing the detection time to5Minutes, while the body is flexibly embedded into the production line process, achieving“Instant production and testing”The quality control mode of the enterprise has improved the product qualification rate2.3One percentage point.

Unlike workshop scenarios, the measurement needs of research laboratories are more focused on“High precision, multi parameter, traceable”Some experimental workpieces in cutting-edge fields not only have special dimensions, but also require dynamic measurements within the stroke range under different temperature and humidity conditions.Ningbo YixinThe Ningbo Light Intensity Imager has been developed to meet this demand“Modular intelligent imaging device”Series, the equipment of this seriesX/Y/ZAxis travel can be achieved by replacing the guide rail module300mm-1200mmFlexible adjustment, equipped with temperature and humidity compensation system and data traceability software. In a precision machinery laboratory of a certain university, researchers used this series of equipment to measure the joint components of micro robots byZAdjust the axis stroke to220mmWith the dynamic measurement function of the equipment, the size change data of the joint at different motion angles was successfully captured, providing strong support for the advancement of scientific research projects.

In addition to conventional scenarios,Ningbo YixinNingbo Guangliang Shuzhi has also launched a special travel imaging device for the environment. , developedATM-4030Imaging equipment, itsX/Yaxis travel400mm×300mm，Zaxis150mmThe device adopts a waterproof and dustproof shell design-10℃to50℃Can work normally within the temperature range of.

From workshop to laboratory, from conventional environment to scene,Ningbo YixinThe stroke adaptation scheme of Ningbo light intensity imaging instrument always takes the actual needs of users as the core.Ningbo YixinNingbo Guangliang Shuzhi not only provides standardized equipment products, but also provides full process services such as customized research and development, on-site debugging, and technical training to ensure that the measurement range of each imaging instrument can accurately match the application scenario. this kind of“scenario-based+customization”The service model enablesNingbo YixinThe Ningbo light intensity imaging instrument has firmly established itself in various measurement scenarios in various industries and has become a trusted choice for more and more enterprises and research institutions.