Carbon monoxide detectorIt is a gas detection instrument with high brightness LCD indicator that can flexibly configure multiple different gas sensors. The instrument can continuously detect the concentration of toxic gases, oxygen, flammable and explosive gases, and observe the current gas concentration values at any time.
The carbon monoxide detector adopts an all metal shell, which greatly improves its performance and various indicators compared to the original series. It uses a new sensor and a 32-bit low-power processor; The circuit adopts 4-layer wiring, which has stronger resistance to weak signals and interference; Independent high-precision imported AD chips (some manufacturers use two-layer circuit boards and built-in AD functions in the CPU to save costs) with their * signal processing algorithms, resulting in higher and more stable measurement accuracy; 2.5-inch dot matrix display interface, with intuitive and generous readings; *The craftsmanship design brings rock solid quality.
Characteristics of carbon monoxide detector:
1. The robustness of the sturdy casing and electronic characteristics;
2. The carbon monoxide detector can display carbon monoxide concentrations ranging from 0 to 1000 ppm on a large LCD screen;
3. Bright backlighting ensures clear readings even in dim environments;
When the concentration of carbon monoxide increases, the frequency of the buzzing sound will also increase;
5. The maximum value retention function can store and display the maximum carbon monoxide concentration value;
6.Carbon monoxide detectorThe sensor automatically resets to zero and self checks during startup.
7. The carbon monoxide concentration buzzer can be turned off.
When not in operation for 20 minutes, the pen will automatically light up, extending the battery life.
9. It is convenient to replace the battery of the carbon monoxide detector;
10. A replaceable probe that extends the lifespan of the tool.
11. C50 portable bag, battery and instruction card.
12. Stable electronic chemical carbon monoxide sensor;
13. Carbon monoxide detector has a sensor lifespan of up to three years (typical value): calibrated once a year.
The lifespan of alkaline batteries is 500 hours (typical value).
The carbon monoxide detector is suitable for continuous online detection of carbon monoxide concentration in various industrial and special environments. The instrument adopts imported electrochemical sensors and microcontroller technology, which has the advantages of stable signal, high accuracy, and good repeatability. The explosion-proof wiring method is suitable for various hazardous areas.Carbon monoxide detectorCompatible with various control systems such as alarm systems, PLC, DCS, etc., it can achieve remote monitoring, remote control, remote alarm, computer data storage, analysis and other functions.