When using an air bath constant temperature oscillator, the following precautions should be taken:

The gas bath constant temperature oscillator must be effectively grounded.

The external power supply must meet the requirements of the gas bath constant temperature oscillator. Before use, ensure that the power socket is in good contact and the fuse is intact.

Good contact plugs and sockets should be used, and the power must be matched.

Do not arbitrarily lengthen or shorten the power cord.

Do not heat flammable, explosive, volatile, or corrosive substances.

Repairs are not allowed without authorization and must be carried out by professional maintenance personnel.

When replacing the fuse, the power plug must be unplugged.

It is necessary to fully read and understand the user manual of this product before operating it.

Safety warning: It is necessary to fully read and understand the user manual of the gas bath constant temperature oscillator before operating it. When replacing fuses and repairing electrical components, the power plug must be unplugged.

Operation completed: Stop the oscillator and turn off the temperature control device, then remove the sample.

Cleaning and maintenance: Clean the instrument for the next use and properly maintain it to extend its lifespan and maintain its performance.

In addition, it should be noted that:

Regularly clean the outer shell and internal components of the gas bath constant temperature oscillator to ensure the cleanliness of the equipment and avoid the accumulation of dust and impurities that may affect its operation.

Regularly check the temperature, amplitude, and other parameters of the gas bath constant temperature oscillator to ensure its normal operation, and promptly detect and eliminate faults.

The use of specially designed tools such as rotor fixtures and oscillator fixtures often requires replacement and cleaning throughout the entire operation.

Control the liquid level. When using an air bath constant temperature oscillator, it is necessary to maintain the liquid level to avoid excessive or insufficient liquid level affecting the normal operation of the equipment.

After shutdown, pay attention to storage. When shutting down the equipment, clean it thoroughly and store it in a dry and ventilated place to prevent it from becoming a breeding ground for bacteria.