Malachite Green Rapid Detection Kit (Colloidal Gold)

(1) Remove the reagent bucket from the original packaging, open it and take out the required number of microporous reagents and test paper cards, and mark them properly. Please use it as soon as possible within 60 minutes. After removing the required microporous reagent, please immediately cover the reagent barrel lid to prevent moisture.

(2) Use a micropipette to aspirate 100 l of the test sample solution into the micropores, slowly aspirate and mix thoroughly with the reagents in the micropores.

(3) After incubating at room temperature (20-25 ℃) for 3 minutes, take about 100ul of the mixed solution and drop it vertically into the sample well (S well).

(4) Start timing when the liquid flows, react for 5 minutes, and determine the result according to the schematic diagram. Other times are considered invalid.