Three coordinate measuring machine procurementBy using air flotation transmission and servo control technology, combined with precise measurement software, accurate large-scale product testing can be achieved, providing assistance for the testing and quality control of precision components. It is widely used in industries such as hardware, plastics, electronics, molds, hardware processing, mobile phone accessories, computer accessories, automotive parts, clocks, circuit boards, etc.
1. The nominal values of geometric features that can be directly extracted from CAD. Programming can be completed simply and conveniently by clicking on the workpiece model.
2. No need to open a dialog box, simply click on CAD features to quickly create automatic features.
3. Supports multiple formats of CAD files. You can directly use general CAD files in formats such as UG, SAT, IGES, or STEP. Provide probe path animation, utilize dynamic measuring machine models, automatically edit measurement programs based on workpiece and fixture CAD, and automatically check probe collisions.
Common fault handling analysis:
Fault phenomenon: The motion axis is stuck; Possible reasons: Insufficient lubrication/contamination of the guide rail; Solution: Clean the guide rail and add oil, check the belt tension.
Fault phenomenon: probe triggered incorrectly; Possible reasons: bent measuring needle/loose cable; Solution: Replace the measuring pin and unplug the signal wire again.
Fault phenomenon: sudden power outage; Possible reasons: insufficient air pressure (<0.4MPa) or grating contamination; Solution: Check the air source pressure and wipe the grating ruler.
Fault phenomenon: Z-axis abnormal noise: Possible causes: friction disc too tight or screw wear; Solution: Adjust the tightness of the friction disc and check the pre tightening force of the screw.
Fault phenomenon: Drive motor alarm; Possible reasons: poor heat dissipation or voltage fluctuations; Solution: Clean the control cabinet fan and install a UPS stabilized power supply.
Notes:
Collision prevention: Manual movement speed ≤ 10% of maximum speed, path simulation is required before automatic measurement.
Environmental management: Daily recording of temperature and humidity to avoid equipment being in close proximity to vibration sources (such as stamping machines).
Data security: Weekly backup of measurement programs and calibration parameters.