Condensed water test chamberIt is mainly used to determine the characteristics of the test in humid environments and the defects of corrosion protection. The test should not generate additional heat during the load process. The sample switch test preparation test duration, test result calculation, and result evaluation should refer to the corresponding standards.

Condensed water test chamberExperimental conditions:

Due to the radiation effect of the condensation artificial climate test chamber wall or the cooling effect of the test itself, the temperature of the test surface inside the test chamber is lower than the saturation temperature of the ambient air inside the test chamber. As a result, water in the air will condense on the test surface. During the condensation process inside the condensation artificial climate test chamber, the air temperature inside the test chamber is 40 degrees Celsius.

Condensed water test chamberThe heating time depends on the type and quantity of the sample, the ratio of the surface area of the water tank to the surface area of the four taboos of the test chamber, and the water temperature. In order to prevent the generation of steam, the water temperature should not exceed 60 degrees. If the test conditions meet the standard requirements and the temperature of the condensate test chamber is measured in an effective space, the size of the test chamber and the configuration of the temperature measurement and control device can be arbitrarily selected. The test chamber should be equipped with an appropriate door or other opening that can be closed for testing or ventilation (if the amount of condensate generated during the test is sufficient, the artificial climate test equipment may not be equipped with a bottom water tank).