What is the purpose of the air jet sieve airflow screening device? The 510-176 has been under development since 2017. Air jet sieve airflow screening instrument is a screening instrument. It uses air jet airflow as power to push the powder to collide with the screen cover, and then sucks the dispersed small particles into the sample collector, thereby achieving ideal particle separation and screening. This screening technology was developed and produced by Huimeike in 2017 before it was introduced domestically. As a member of the China Particle Society and the China Association for Analysis and Testing, Huimeike has accumulated 6 years of rich testing experience and over 130 satisfied industry users.

Calibration steps for air jet screen electronic scale:

• Gently lift the electronic scale with both hands until the balance bubble stops at the center of the black ring, adjust the non landing feet clockwise until they land, and the electronic scale is leveled

• When turned on and displays 999999, press "Function", and the electronic scale will display "0"

• Press' Confirm ', wait for the flashing to stop, then press' Peel' to switch the weight of the weight, usually using a 200 gram weight

• Place the weight, the oval mark on the upper left disappears and reappears, press "confirm", flash and stop, calibration is complete

It is recommended to complete the calibration of the electronic scale before each test

Air jet screen Huimeike
Airflow screening instrument Huimeike
Air jet screening instrument Huimeike
Gas screening analyzer Huimeike