High precision magnetic stirring oil bath potProduct Overview:
JY-1S high-precision magnetic stirring oil bath potIt is an improved version of our DF-1 heat collecting magnetic stirrer, which has a large stirring capacity, high temperature control accuracy, and three functions of dry burning, water burning, and oil burning. By heating uniformly at the bottom and adding magnetic stirring function, the range of use of this instrument has been expanded. Especially suitable for high-temperature stirring experiments on rotary evaporators, spherical bottles, and various glass burners, it is one of the commonly used instruments in modern laboratories.
High precision magnetic stirring oil bath potProduct Features:
1. The pot body is made of stainless steel by one-time molding and pressing, without welding seams, with excessive rounded corners inside. The heating components and sensors are installed outside the pot body, making it easy to clean inside. The pot is made of 304 stainless steel and rusts.
2. Tempered glass cover, the internal working condition is clear at a glance.
3. Advanced microcomputer temperature controller, integrating timing, temperature control, and temperature display functions.
4. It has over temperature alarm and over temperature protection functions.
5. Sensor temperature measurement error pop-up function.
6. Dual screen LED display, time and temperature are clear at a glance.
7. Integrated speed control circuit, infinitely adjustable mixing speed, smooth operation.
High precision magnetic stirring oil bath potTechnical instructions:
1. Power supply: single-phase AC 220V ± 10V 50HZ
2. Overall power: 860W
3. Mixing power: 40W
4. Heating power: ≤ 800W
5. Constant temperature setting and measurement: microcomputer control, LED dual screen display
6. Speed range: Starting to 2000 revolutions per minute, stepless speed regulation
7. Temperature control range: RT-300.0 ℃ Accuracy ± 0.1 ℃
8. Temperature fluctuation: ≤ 0.2 ℃
9. Temperature timing range: 1-9999 minutes or normally open
10. Working size: Φ 235 × 140mm
11. Working capacity: 5 liters
4、 High precision magnetic stirring oil bath potUsage:
1. Please check if the appearance of the instrument is intact and if the power cord is not damaged during use.
2. Add heat transfer oil into the pot and then turn on the power.
3. Put the stirrer into the solution cup, and then place the beaker in the center of the pot.
4. Turn on the power switch, the digital temperature control lights up, the upper row displays the actual temperature, and the lower row displays the set temperature. Click the function key set, and the upper row displays sp, and the lower row displays the set temperature. Click the △ or ▽ key to set the working temperature. After setting, click the function key set again, and the upper row displays st, and the lower row displays the constant temperature timing time. Click the △ or ▽ key to select the constant temperature timing time. After the time is set, click the function key to exit the setting state. At this time, the instrument will run according to the set temperature and time.
5. Turn on the mixing switch and slowly rotate the speed control knob clockwise to increase the mixing speed from slow to fast. Adjust to the desired speed. If there is jumping phenomenon in the mixer during work, adjust the speed control knob counterclockwise to the lowest speed, and then repeat the previous operation to restore normal mixing.
6. After use, adjust the speed knob to the lowest end and then turn off the mixing switch.
7. Turn off the power switch, cut off the power, and take out the beaker after the oil temperature cools down.
High precision magnetic stirring oil bath potNotes:
1. To ensure safety, please use a three hole safety socket and ensure proper grounding during use.
2. The heating time should generally not be too long, intermittent use can prolong the service life. Medium speed operation can work continuously for 8 hours, while high-speed operation can work continuously for 4 hours.
3. The instrument will have different heating parameters when using different heating media, and the parameter adjustments are as follows:
First, press and hold the function key set for about 4 seconds. When Lc is displayed on the upper row of the temperature controller, release your hand and click the △ key to adjust the parameter to 3. Continuously click the function key set and find the P parameter. At this point, adjust the parameter. Once the adjustment is complete, press and hold the function key set until the actual temperature is displayed on the upper row, then release it. At this point, the set internal heating parameters will be saved.
Parameter reference values: (Water: P=15) (Oil: P=25) (Dry burning: P=75)
4. The oil level should not be too high to prevent experimental errors caused by oil overflow.
5. To extend the service life of the instrument, please be careful not to let the control box get damp and prevent electrical leakage.
6. If not used for a long time, please wipe it clean and place it in a dry and ventilated place.
Note: The size and capacity can be customized according to user requirementsHigh precision magnetic stirring oil bath pot.The instrument is covered by a one-year warranty from the date of manufacture (any human error or improper use will incur production costs), with lifelong maintenance.