Low temperature constant temperature water bath manufacturerIt is a high-precision constant temperature source with built-in cooling and heating, which can be used for constant temperature experiments in the machine's water tank or connected to other equipment through a hose as a matching constant temperature source. Widely used in research departments such as petroleum, chemical, electronic instruments, physics, chemistry, bioengineering, medicine and health, life sciences, light industry and food, physical property testing and chemical analysis, as well as in higher education institutions, enterprise quality inspection and production departments, to provide users with a cold controlled, uniform and constant temperature field source for conducting constant temperature tests or tests on test samples or produced products. It can also be used as a heat or cold source for direct heating or cooling and auxiliary heating or cooling.
Low temperature constant temperature water bath manufacturerStructure:
The shell is made of metal plate, and the control box is directly installed on the water tank. There are two inlet and outlet nozzles for the condensate pipe next to it, and an imported water pump is used as the circulating power in the water tank to solve the problem of uneven warm water, so that the temperature control accuracy and water uniformity of the instrument can meet high requirements. This product can be used for internal and external circulation. By connecting the two inlet and outlet pipes with latex tubes, it can be used for internal circulation. Remove the latex tubes and connect the two water pipes to the inlet and outlet of the reaction kettle respectively to form external circulation. The copper water pipe near the control panel is the outlet pipe connected to the pump, and the other is the inlet pipe. Please be careful not to connect them incorrectly to avoid water backflow when starting up.
Low temperature constant temperature water bath manufacturerConnection of circulating pump:
1. The connection of the internal circulation pump can be made by connecting the outlet pipe to the inlet pipe with a hose, which can be randomly equipped with a hose
2. Connect the external circulation pump to the external circulation system. Connect the outlet pipe to the inlet of the external tank container with a flexible hose, and connect the inlet pipe to the outlet of the external tank container for injection. The pipe on the left front of the instrument is the inlet pipe, and the pipe on the back is the outlet pipe.