1. The microcomputer intelligent control system heats up quickly, maintains stable temperature, and is easy to operate.

2. Dual use of water and oil: room temperature~100 ℃, room temperature~200 ℃.

3. The LED dual window displays temperature measurement values and temperature setting values separately, with a resolution of 0.01 ℃ or 0.1 ℃, and convenient touch button operation.

4. It can circulate internally and externally, ensuring a uniform and constant temperature. The circulation pump can draw the heated liquid from the tank to the heating or constant temperature machine for external testing.

5. Optional cold water circulation device can be equipped to quickly cool down the system by introducing tap water, suitable for temperature control of exothermic reactions at high temperatures.

6. Suitable for electronic detection, chemical reactions, high-temperature distillation, semiconductor industry, etc.

Low temperature constant temperature water bath manufacturerUsage:

Before use, please carefully read the instructions, familiarize yourself with the instrument and control panel, and use a megohmmeter to measure whether there are any poor or short circuits in the power supply, plug, and grounding. Set the experimental temperature according to the temperature setting method, and once the temperature remains constant, the experiment can begin. This constant temperature heating solution uses distilled water and prohibits the use of river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the constant temperature sensitivity.

Low temperature constant temperature water bath manufacturerMaintenance:

1. The instrument should be regularly cleaned to maintain the cleanliness of the workbench and operating panel;

2. Regularly observe the liquid level in the tank. When the liquid level is too low, liquid medium should be added in a timely manner;

3. Considering safety factors, it is stipulated that low-temperature constant temperature water tanks above 100 ℃ should be made into internal circulation. After changing to external circulation according to requirements, special attention should be paid to the firmness of the connection of the outlet pipe to prevent it from falling off and scalding.