-
E-mail
841475174@qq.com
-
Phone
13921008373
-
Address
No. 29 Jinhu Road, Jintan District, Changzhou City, Jiangsu Province
Changzhou Dingxin Experimental Instrument Co., Ltd
Briefly describe the standardized operation process of HH-601 super constant temperature water bath
Date: 2025-12-23Read: 1
The HH-601 super constant temperature water bath is a high-precision temperature control device widely used in fields such as physical and chemical experiments, biological cultivation, material aging testing, and metrological calibration. Its temperature control accuracy can reach ± 0.01 ℃, and its stability far exceeds that of ordinary water baths. However, its performance is highly dependent on the correct usage method. Improper operation not only affects the experimental results, but may also shorten the lifespan of the equipment. Mastering the scientific and standardized operation process of HH-601 super constant temperature water bath is the key to ensuring its long-term stable operation.
1、 Preparation before use
Check water quality: Deionized water or distilled water must be used, and tap water is strictly prohibited (to prevent scale from blocking heating tubes and sensors);
Check the liquid level: The water level should be higher than the heating tube and 2-3cm away from the upper edge. If it is too low, it is prone to dry burning, and if it is too high, it will boil and overflow;
Check cleanliness: The inner container should be free of stains, algae, or sediment to avoid contaminating the sample or interfering with temperature control.
2、 Standardize operational procedures
Power on preheating: First add water and then turn on the power. Set the target temperature and then turn on the circulation pump to evenly increase the water temperature;
Enable stirring/circulation: Turn on the built-in magnetic stirring or external circulation pump to eliminate temperature stratification and ensure that the temperature difference inside the tank is ≤± 0.05 ℃;
Place the sample: Use a dedicated bracket or test tube rack to avoid direct contact with the heating tube or slot bottom and prevent local overheating;
Cover with insulation: Use the original cover plate to reduce heat loss and evaporation, improve temperature control efficiency, and save energy.
3、 Precautions during operation
Do not add cold water at high temperatures to prevent the inner liner from cracking due to thermal stress;
Long term constant temperature (>24 hours) requires regular hydration to compensate for evaporation losses;
If used for low temperatures (<room temperature), the refrigeration module (if any) should be enabled and the cooling fan should be ensured to be unobstructed.
4、 Post use maintenance
Turn off the heating and power, wait for the water temperature to drop to room temperature before emptying (especially during winter antifreeze);
Use a 5% citric acid solution to remove scale once a month, rinse thoroughly after cleaning;
When not in use for a long time, keep the inner container dry and cover it with a dust cover.