Dynamic Dilution DeviceAdvantages introduction:
High precision flow control: By using a mass flow controller (MFC) to precisely control the flow rates of diluent and carrier gases, the accuracy of the dilution ratio is ensured, and stable and known concentration standard gases can be generated to meet various analytical needs.
Flexible multi-channel configuration: Usually equipped with multiple channels, each channel can independently set different flow ranges to meet the dilution needs of different concentrations and types of gases, and can cope with various complex analysis scenarios. As standard sampleDynamic Dilution DeviceSupports dynamic dilution of 2-6 gas cylinders, and each channel can be independently configured with a mass flow controller with different flow ranges.
Real time monitoring and feedback: It can monitor the pressure and flow rate in the gas pipeline in real time, ensuring the stability and reliability of the dilution process. Once an abnormality is detected, the instrument will immediately sound an alarm and may take automatic adjustment measures to restore a stable state. Real time monitoring of parameters such as pressure and flow rate can be carried out throughout the entire sample preparation process.
High degree of automation: Supports automated operations, users can input parameters through preset programs or touch screen interfaces, and the instrument will automatically complete dilution, mixing, and output steps, improving work efficiency and reducing human errors.
Intelligent calibration and diagnosis: Equipped with intelligent calibration function, it can automatically calibrate regularly to ensure measurement accuracy. At the same time, it can also perform self diagnosis, timely detect and report potential problems, making it easy for users to maintain and repair.
Multi gas support and flexible configuration: capable of handling various types of gases, including corrosive gases, toxic gases, and flammable and explosive gases, with wide adaptability. And according to user needs, different dilution ratios, flow ranges, and output interfaces can be configured to meet various specific analysis requirements.
Complete security protection mechanism: Usually equipped with multiple security protection mechanisms, such as overvoltage protection, overcurrent protection, and leakage detection, it can ensure that the instrument automatically shuts down or takes other security measures in case of abnormal situations, protecting the safety of operators and equipment.
High reliability design: Adopting high reliability design and manufacturing processes to ensure stability and accuracy during long-term operation. At the same time, it has the characteristics of easy maintenance and repair, which reduces the operating costs for users.
Cost and resource savings: Low concentration standard gases can be prepared on-site, avoiding waste caused by dilution requirements after purchasing high concentration standard gases, and reducing cost increases caused by short shelf life and limited usage of standard gases. For example, when users purchase multi-component, low content (a few tenths of a percent, ppm level, or even ppb level) standard gases, not only is the price expensive, but the shelf life is often short, and the pressure of low concentration standard gas cylinders cannot be increased, resulting in a very limited number of times a bottle of standard gas can be used. Dynamic diluents can solve these problems.
Easy to carry and install: The exquisitely designed casing is suitable for various installation sites and is also easy to carry to work on site.