-
E-mail
739915789@qq.com
-
Phone
19941565709
-
Address
No. 788 Shuangying Road, Wuyi Industrial Park, Nanqiao District, Chuzhou City, Anhui Province
Anhui Hilbert Environmental Testing Instrument Co., Ltd
The correct operation process and precautions of the walk-in constant temperature and humidity test chamber are shared
Date: 2025-08-13Read: 0
The walk-in constant temperature and humidity test chamber can simulate various climatic conditions, helping engineers verify the performance of products at different temperatures and humidities. However, in order to ensure the normal operation of the equipment and obtain accurate and reliable test results, the correct usage method is crucial. This article will provide a detailed introduction to the correct operation process and precautions of the walk-in constant temperature and humidity test chamber.
1、 Preliminary preparation
1. Confirm equipment status
Before each use, it is necessary to check whether the inside and outside of the test chamber are clean and free of foreign objects, and confirm that all components (such as humidifiers, heaters, cooling systems, etc.) are in good working condition.
Check whether the power connection is stable and the grounding is reliable to prevent leakage accidents.
2. Sample preparation
Select the appropriate number and size of samples based on testing requirements to avoid excessive or oversized samples affecting air circulation and resulting in uneven temperature and humidity distribution.
For volatile or corrosive substances, appropriate protective measures should be taken to prevent contamination of the internal environment of the equipment.
2、 Set parameters
1. Temperature and humidity settings
According to testing standards or product requirements, accurately set the required temperature and relative humidity values on the control panel. Pay attention to the sensitivity differences of different materials to temperature and humidity changes, and arrange testing procedures reasonably.
It is recommended to perform preheating or pre cooling operations first to gradually bring the environment inside the test chamber closer to the set value, in order to reduce the impact of temperature and humidity fluctuations on the sample.
2. Time cycle planning
Set the testing duration to ensure that the entire process covers all stages of environmental changes that the product may encounter. For long-term stability testing, it is also necessary to regularly record data for trend analysis.
3、 Startup and Monitoring
1. Start the test chamber
Lightly press the start button to automatically run according to the preset parameters. At this point, it is important to closely monitor the various indicators on the display screen to ensure they meet expectations.
If any abnormal situation is found (such as high temperature or uncontrolled humidity), immediately stop running and investigate the cause.
2. Real time monitoring
Use remote monitoring software or manually check the test progress at regular intervals to ensure that the temperature and humidity remain within the set range. Some models support SMS or email alarm functions, which notify users immediately once the security threshold is exceeded.
4、 End and maintenance
1. End test
After the test is completed, first turn off the heating, humidification and other functions, and then cut off the main power after the temperature drops to room temperature. Do not directly cut off the power to avoid damaging the compressor or other critical components.
Be careful when taking out the sample to avoid the risk of burns or frostbite. For samples containing moisture, they should be left to stand in a dry environment for a period of time to prevent secondary damage caused by condensation.