High and low temperature test chamberIt simulates the temperature changes in the atmospheric environment to conduct adaptability tests on electrical and electronic products, as well as their components and other materials, during transportation and use in a comprehensive environment of high and low temperatures. Mainly used in product design, improvement, identification, and inspection processes.
In the winter when the climate is dry and the temperature is cold,High and low temperature test chamberOften, there may be situations where the temperature rise is not significant. So, how can we safely use high and low temperature test chambers when the external climate environment is unfavorable?
1. Ensure that the temperature of the usage environment is suitable. It is recommended to equip the space where the high and low temperature test chamber is located with air conditioning to maintain a room temperature between 15~35 ℃.
2. Equipment management or maintenance personnel need to regularly check the system settings to ensure that the equipment performance meets the requirements of winter testing and that the equipment is well grounded. Shorten the maintenance cycle.
3. Flammable, explosive, highly radioactive, and highly corrosive items and materials are prohibited from being stored in the surrounding space of the high and low temperature test chamber to ensure good ventilation and prevent fires. The area around the test chamber must not be subjected to strong vibrations or electromagnetic fields.
4. During the operation of the high and low temperature test chamber, it is not allowed to open the chamber door, and it is prohibited to arbitrarily transport and maintain the test chamber during power on operation.
5. Distribution personnel need to ensure that the power supply voltage is within the rated range and be cautious of overload and short circuit.
6. After the experiment is completed, special attention should be paid to high-temperature burns and low-temperature frostbite when opening the box door, and corresponding protective measures should be taken.
By achieving the above points, we can eliminate the influence of external factors on the experimental testing and ensureHigh and low temperature test chamberNormal experimental operations.