The box type rain test box is mainly used to test the performance of products during storage, transportation, and use in rainy weather environments. It is mainly used to test the physical and other related properties of electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles, and their parts under simulated rainy weather conditions. After testing, the performance of the product can be judged through verification to determine whether it can meet the requirements for product design, improvement, verification, and factory inspection.

During the use of the box type rain test chamber, in order to ensure the efficiency of the equipment, it should be cleaned regularly, including:

1. Cleaning of distribution room: If the box type rain test box is exposed to the environment for a long time, the instruments, distribution boards, water circuits, etc. in the distribution room will accumulate dust. When the air is humid, it can cause equipment failure. To ensure the long-term stable operation of the equipment, please clean the distribution room once a month. Method: First, turn off the main power switch, open the distribution room cover, use a vacuum cleaner (or soft brush, use a vacuum cleaner) to clean the dust from the electrical part, then close the distribution room cover and tighten the fastening screws.

2. Cleaning of the outer box: If the box type rain test box is exposed to the environment for a long time, dust will accumulate on the outer surface. To ensure that the equipment does not affect indoor aesthetics and cleanliness, and to slow down equipment aging, please clean the outer surface of the equipment once a week.

In addition, the usage environment also has a significant impact on improving the efficiency of the box type rain test chamber, among which:

1. Environmental temperature: 2-55 degrees Celsius; Environmental humidity: 0-85%;

2. Power requirements: AC 380 (± 10%) V/50HZ three-phase five wire system, pre installed capacity: 2.0KW;

3. No direct sunlight or direct radiation from other heat sources;

4. Partial space should be left between the waterproof rain test chamber and the wall;

5. There are no corrosive gases, strong vibration sources, or strong electromagnetic fields around;

6. A certain amount of space should be left between the tested items inside the box and between the inner wall of the box and the tested items.

For more information about the box type rain test box, please continue to follow our company!