Automatic high-pressure steam sterilizerIt is a laboratory or industrial equipment that uses high-temperature and high-pressure steam for efficient sterilization, widely used in fields such as food and scientific research.
5 sterilization modes, each mode can set up to 10 program storage calls.
1. Solid mode: Heating → Sterilization → Cooling, Exhaust
2. Liquid mode: Heating → Sterilization → Cooling → Exhaust
3. Liquid with insulation mode: heating → sterilization → cooling → exhaust → insulation
4. Agar mode: heating → melting → insulation
5. Solid belt drying mode: heating → sterilization → cooling, steam exhaust → drainage → drying (optional)
Key points for daily maintenance and upkeep:
Standardized daily maintenance is the key to preventing failures and extending equipment lifespan.
Regular drainage and water replacement: It is recommended to drain the built-in water tank and sterilization chamber every week and replace them with new water to prevent dirt from blocking the solenoid valve or causing component rust.
Clean sterilization chamber: The sterilization chamber should be regularly cleaned to remove scale and debris. When using a brush with a handle for cleaning, be careful not to apply too much force to avoid damaging the electric heating tube and temperature control switch.
Check key components: Before each use, check whether the sealing ring is damaged. If it is damaged, replace it immediately. At the same time, the working status of key components such as safety valves, pressure gauges, and water level sensors should be regularly checked.
Regular performance testing: The sterilizer should be regularly monitored for performance, including the use of biological indicators for testing and physical parameter calibration, to verify sterilization effectiveness. It is recommended to test the safety valve once a month and send it to the local special inspection institute for calibration once a year.