-
E-mail
1344247897@qq.com
-
Phone
13738027672
-
Address
Yujiazhuang, Zhazhuangqiao, Renhe Street, Yuhang District, Hangzhou City
Product Categories
Hangzhou Zhongda Experimental Equipment Co., Ltd
medicine cabinet
NegotiableUpdate on 02/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The PP medicine cabinet is made of brand new 1.0mm cold-rolled steel plate by punching, folding and welding. After electrolytic degreasing agent, acid pickling and phosphating, it is then treated with Akzo Nobel outdoor special epoxy resin powder electrostatic spraying for corrosion resistance. The door panel adopts an inner and outer double-layer structure, filled with sound insulation materials and reinforced with reinforcing ribs. It is sturdy and firm, not easy to deform, and has no welding connection. It can be disassembled with shock-absorbing pads, and the overall appearance is beautiful and generous.
Product Details
Description of each component of PP medicine cabinet:
1. Cabinet: upper cabinet glass door, lower cabinet steel door; Made by using a brand new 1.0mm cold-rolled steel plate for punching and welding, it undergoes electrolytic degreasing agent, acid pickling and phosphating, and then is treated with Akzo Nobel outdoor specific epoxy resin powder electrostatic spraying, which has strong acid and alkali resistance and corrosion resistance.
2. Cabinet door: Made of brand new 1.0mm cold-rolled steel plate by punching, folding, and welding, it is treated with electrolytic degreaser, acid pickling and phosphating, and then treated with Akzo Nobel outdoor specific epoxy resin powder electrostatic spraying for corrosion resistance. The door panel adopts an inner and outer double-layer structure, filled with sound insulation materials and reinforced with reinforcing ribs. It is sturdy and firm, not easy to deform, and has no welding connection. It can be disassembled with shock-absorbing pads, and the overall appearance is beautiful and generous.
3. Side panel: Made of brand new 1.0mm cold-rolled steel plate by punching, folding, and welding, it is treated with electrolytic degreaser, acid pickling and phosphating, and then treated with AkzoNobel outdoor specific epoxy resin powder electrostatic spraying.
4. Laminated board: Made of brand new 1.0mm cold-rolled steel plate by punching, folding, and welding, it is treated with electrolytic degreaser, acid pickling and phosphating, and then treated with Akzo Nobel outdoor special epoxy resin powder electrostatic spraying. The height of the laminated board can be adjusted.
5. Window: Made of 5mm thick tempered glass, it has high strength, good bending resistance, and will not produce sharp edged small fragments when shattered.
6. Hinge: Made of laboratory specific concealed alloy hinges with strong corrosion resistance.
7. Handle: Made of laboratory specific corrosion-resistant PVC handle, with strong corrosion resistance..
8. Adjusting feet: Using injection molded feet with a diameter of 12mm, nickel plated screws, the screws and feet can rotate freely. The bottom of the feet has independent buffering soft rubber, which is shockproof, moisture-proof, and corrosion-resistant. The cabinet height can be adjusted appropriately according to the indoor floor, with a maximum adjustment of 0-50mm.
PP medicine cabinet size table:
| size | Length mm (L) | Width mm (W) | Height mm (H) | Total height mm |
| 1 | 900 | 450 | 1800 | 1800 |
| Note: The specific length can be customized according to needs, and the above is standard equipment. | ||||
