-
E-mail
1344247897@qq.com
-
Phone
13738027672
-
Address
Yujiazhuang, Zhazhuangqiao, Renhe Street, Yuhang District, Hangzhou City
Product Categories
Hangzhou Zhongda Experimental Equipment Co., Ltd
cupboard
NegotiableUpdate on 02/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The door panel of the container cabinet is made of brand new 1.0mm cold-rolled steel plate by punching, folding, and welding. After electrolytic degreasing agent, acid pickling and phosphating, it is then treated with Akzo Nobel outdoor specific epoxy resin powder electrostatic spraying. The door panel adopts an inner and outer double-layer structure, filled with sound insulation materials and reinforced with reinforcing ribs. It is sturdy and firm, not easy to deform, and has no welding connection. It can be disassembled with shock-absorbing pads, and the overall appearance is beautiful and generous.
Product Details
Structural characteristics of container cabinet:
1. Cabinet: Both the upper and lower cabinets have glass doors; Made by using a brand new 1.0mm cold-rolled steel plate for punching, folding, and welding, it is treated with electrolytic degreaser, acid pickling and phosphating, and then treated with Akzo Nobel outdoor specific epoxy resin powder electrostatic spraying
2. Door panel: Made of brand new 1.0mm cold-rolled steel plate by punching, folding, and welding, it is treated with electrolytic degreaser, acid pickling and phosphating, and then treated with Akzo Nobel outdoor specific epoxy resin powder electrostatic spraying. The door panel adopts an inner and outer double-layer structure, filled with sound insulation materials and reinforced with reinforcing ribs. It is sturdy and firm, not easy to deform, and has no welding connection. It can be disassembled with shock-absorbing pads, and the overall appearance is beautiful and generous.
3. Side panel: Made of brand new 1.0mm cold-rolled steel plate by punching, folding, and welding, it is treated with electrolytic degreaser, acid pickling and phosphating, and then treated with AkzoNobel outdoor specific epoxy resin powder electrostatic spraying
4. Layer board: Made of 1.0mm thick 304 stainless steel, the layer board is punched with circular holes of different sizes for easy placement of containers. It is sturdy, durable, chemical resistant, and acid and alkali resistant.
5. Water tray: Made of 5mm PP material. Prevent liquid exposure.
6. Window: Made of 5mm thick tempered glass, it has high strength, good bending resistance, and will not produce sharp edged small fragments when shattered.
7. Hinge: Made of laboratory specific concealed alloy hinges with strong corrosion resistance.
8. Handle: Made of laboratory specific corrosion-resistant PVC handle, with strong corrosion resistance.
9. Adjusting feet: Using injection molded feet with a diameter of 12mm, nickel plated screws, the screws and feet can rotate freely. The bottom of the feet has independent buffering soft rubber, which is shockproof, moisture-proof, and corrosion-resistant. The cabinet height can be adjusted according to the indoor floor, ranging from 0-50mm.
Dimensional drawing of container cabinet:
| size | Length mm (L) | Width mm (W) | Height mm (H) | Total height mm |
| 1 | 900 | 450 | 1800 | 1800 |
| Note: The specific length can be customized according to needs, and the above is standard equipment. | ||||
